Material Properties:transparent|UV resistance|Weather resistance
Application Areas:Casters|Outdoor applications
Color:--
Grade:Injection grade
Technical Data Sheet
optical performance
Test Condition
Test Method
Test Result
Refractive index
ASTM D542
1.586
transmissivity
2540μm
ASTM D1003
88.0 %
turbidity
2540μm
ASTM D1003
1.0 %
impact performance
Test Condition
Test Method
Test Result
Dart impact
23°C
ASTM D3029
169 J
Impact strength of cantilever beam gap
ASTM D1822
546 kJ/m²
flammability
Test Condition
Test Method
Test Result
UL flame retardant rating
0.73mm
UL 94
HB
mechanical properties
Test Condition
Test Method
Test Result
tensile strength
Yield
ASTM D638
62.1 Mpa
tensile strength
Break
ASTM D638
65.5 Mpa
elongation
Yield
ASTM D638
7.0 %
elongation
Break
ASTM D638
110 %
Bending modulus
50.0mmSpan
ASTM D790
2340 Mpa
bending strength
Yield,50.0mmSpan
ASTM D790
93.1 Mpa
Taber abraser
1000Cycles,1000g,CS-17Wheel
ASTM D1044
10.0 mg
thermal performance
Test Condition
Test Method
Test Result
Hot deformation temperature
0.45MPa,Unannealed,6.40mm
ASTM D648
138 °C
Hot deformation temperature
1.8MPa,Unannealed,6.40mm
ASTM D648
132 °C
Vicat softening temperature
ASTM D15255
154 °C
Linear coefficient of thermal expansion
MD:-40to95°C
ASTME831
6.8E-05 cm/cm/°C
specific heat
ASTMC351
1260 J/kg/°C
thermal conductivity
ASTMC177
0.19 W/m/K
RTI Elec
UL 746
130 °C
RTI Imp
UL 746
130 °C
RTI Str
UL 746
130 °C
Physical properties
Test Condition
Test Method
Test Result
Specific volume
ASTM D792
0.835 cm³/g
melt mass-flow rate
300°C/1.2kg
ASTM D1238
7.0 g/10min
Shrinkage rate
MD:3.20mm
Internal Method
0.50-0.70 %
Water absorption rate
24hr
ASTM D570
0.15 %
Water absorption rate
Equilibrium,23°C
ASTM D570
0.35 %
Water absorption rate
Equilibrium,100°C
ASTM D570
0.58 %
Outdoor applicability
UL 746C
f1
Electrical performance
Test Condition
Test Method
Test Result
High arc combustion index
HAI
UL 746
PLC 1
High voltage arc tracing rate
HVTR
UL 746
PLC 2
Hot wire ignition
HWI
UL 746
PLC 4
Volume resistivity
ASTM D257
>1.0E+17 ohms·cm
Dielectric strength
3.20mm,inAir
ASTM D149
15 KV/mm
Dielectric constant
50Hz
ASTM D150
3.17
Dielectric constant
60Hz
ASTM D150
3.17
Dielectric constant
1MHz
ASTM D150
2.96
Dissipation factor
50Hz
ASTM D150
9E-04
Dissipation factor
60Hz
ASTM D150
9E-04
Dissipation factor
1MHz
ASTM D150
0.010
Compared to the anti leakage trace index
CTI
UL 746
PLC 2
hardness
Test Condition
Test Method
Test Result
Rockwell hardness
M-Sale
ASTM D785
70
Rockwell hardness
R-Sale
ASTM D785
118
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.