PFA TEFLON® 420HP DUPONT USA
338
- Unit Price:US$ 29,193 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:10MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:--
- Application Areas:--
- Color:--
- Grade:Blow molding grade
Technical Data Sheet
Compare
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 118 |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | -- | ISO 306/B50 | 215 °C |
| -- | ISO 306/B120 | 215 °C | |
| Linear coefficient of thermal expansion | MD：-40到40°C | ASTME831 | 2.5E-05 cm/cm/°C |
| MD：-40到40°C | ISO 11359-2 | 2.5E-05 cm/cm/°C | |
| TD：-40到40°C | ASTME831 | 1.2E-04 cm/cm/°C | |
| TD：-40到40°C | ISO 11359-2 | 1.2E-04 cm/cm/°C | |
| Heat Deflection Temperature | 0.45MPa,未退火,3.20mm | ASTM D648 | 220 °C |
| 0.45MPa,未退火,6.40mm | ASTM D648 | 216 °C | |
| 0.45MPa,Unannealed,64.0mmSpan | ISO 75-2/Bf | 217 °C | |
| 1.8MPa,未退火,3.20mm | ASTM D648 | 203 °C | |
| 1.8MPa,Unannealed,64.0mmSpan | ISO 75-2/Af | 204 °C | |
| vicat | ASTM D152514 | 215 °C | |
| -- | ISO 306/A50 | 223 °C |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| filler | ASTM D229 | 30 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 5.0 kJ/m² |
| 23°C | ISO 179/1eA | 5.0 kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 45 kJ/m² |
| 23°C | ISO 179/1eU | 45 kJ/m² | |
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 7.0 kJ/m² |
| 23°C | ISO 180/1A | 8.0 kJ/m² | |
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | 45 kJ/m² |
| 23°C | ISO 180/1U | 45 kJ/m² | |
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 8.00 J |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Specific volume | ASTM D792 | 0.650 cm³/g | |
| melt mass-flow rate | 250°C/2.16kg | ASTM D1238 | 17 g/10min |
| Melt volume flow rate | 250°C/2.16kg | ISO 1133 | 13.0 cm3/10min |
| shrinkage rate | TD：--3 | 内部方法 | 0.40-0.60 % |
| TD：--4 | 内部方法 | 0.50-1.0 % | |
| TD：3.20mm | 内部方法 | 0.50-1.0 % | |
| Water absorption rate | 24hr | ASTM D570 | 0.060 % |
| 饱和,23°C | ISO 62 | 0.26 % | |
| 平衡,23°C,50%RH | ISO 62 | 0.080 % | |
| shrinkage rate | MD：--2 | 内部方法 | 0.50-0.80 % |
| MD：--3 | 内部方法 | 0.30-0.50 % | |
| MD：--4 | 内部方法 | 0.30-0.70 % | |
| MD：3.20mm | 内部方法 | 0.30-0.80 % | |
| TD：--5 | 内部方法 | 0.60-0.90 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | 1MHz | ASTM D150 | 3.70 |
| Dissipation Factor | 100Hz | ASTM D150 | 2E-03 |
| 1MHz | ASTM D150 | 0.020 | |
| volume resistivity | ASTM D257 | >3.2E+16 ohms·cm | |
| dielectric strength | 1.60mm,在油中 | ASTM D149 | 25 KV/mm |
| 3.20mm,inAir | ASTM D149 | 19 KV/mm | |
| dielectric constant | 100Hz | ASTM D150 | 3.80 |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 9300 Mpa | |
| ISO 527-2/1 | 9300 Mpa | ||
| tensile strength | Yield | ASTM D638 | 120 Mpa |
| 屈服 | ISO 527-2/5 | 125 Mpa | |
| Break | ASTM D638 | 120 Mpa | |
| 断裂 | ISO 527-2/5 | 125 Mpa | |
| Tensile strain | Yield | ASTM D638 | 3.0 % |
| 屈服 | ISO 527-2/5 | 2.0 % | |
| Break | ASTM D638 | 3.0 % | |
| 断裂 | ISO 527-2/5 | 2.0 % | |
| flexural modulus | 50.0mmSpan | ASTM D790 | 7580 Mpa |
| ISO 178 | 8500 Mpa | ||
| bending strength | ISO 178 | 195 Mpa | |
| Break,50.0mmSpan | ASTM D790 | 189 Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top