Material Properties:Creep resistance｜high strength
Application Areas:sporting goods｜Vehicle electronics｜Pipe fittings｜sheet｜Pipeline system｜film｜Blow molding applications
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
Apparent density		ASTM D1895B	0.70 g/cm³
melt mass-flow rate			6.00 g/10min

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ASTM D638	63.4 Mpa
	tensile strength		ISO 527-2	63.8 Mpa
	tensile strength	tensile strength		ASTM D638	39.9 Mpa
Tensile modulus		ISO 527-2	2470 Mpa
elongation		ASTM D638	4.0 %
Tensile strain		ISO 527-2	3.7 %
Nominal tensile fracture strain		ISO 527-2	77 %
ModuleElasticity		ASTM D638	2.48 GPa
elongation at break		ASTM D638	44 %

Impact resistance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength		ISO 180	190 kJ/m²

film	Test Condition	Test Method	Test Result
Permeation-CE10Fuel		SAEJ2659	0.83 g·mm/m²/atm/24hr

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/A	82.0 °C
melting temperature			230 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top