PBT VALOX™ 4012G SABIC INNOVATIVE US
205
- Unit Price:US$ 3,844 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:25.8MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Ductility｜Fast forming cycle
- Application Areas:Laptop case
- Color:--
- Grade:Enhanced level
Technical Data Sheet
Compare
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ball-indentation hardness | H358/30 | ISO 2039-1 | 117 Mpa |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat Deflection Temperature | 0.45MPa,Unannealed,100mmSpan | ISO 75-2/Be | 215 °C |
| 1.8MPa,未退火,3.20mm | ASTM D648 | 175 °C | |
| 1.8MPa,Unannealed,100mmSpan | ISO 75-2/Ae | 170 °C | |
| vicat | ASTM D152511 | 205 °C | |
| -- | ISO 306/B50 | 205 °C | |
| -- | ISO 306/B120 | 208 °C | |
| ball-indentation hardness | 125°C | IEC 60695-10-2 | Pass |
| Linear coefficient of thermal expansion | MD：-40到40°C | ASTME831 | 6E-05 cm/cm/°C |
| MD：23到80°C | ISO 11359-2 | 6E-05 cm/cm/°C | |
| TD：-40到40°C | ASTME831 | 8E-05 cm/cm/°C | |
| TD：23到150°C | ISO 11359-2 | 8.5E-05 cm/cm/°C | |
| TD：23到80°C | ISO 11359-2 | 8E-05 cm/cm/°C |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| Burning wire flammability index | 1.0mm | IEC 60695-2-12 | 750 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dart impact | 23°C,TotalEnergy | ASTM D3763 | 4.00 J |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 6.0 kJ/m² |
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | 37 kJ/m² |
| 23°C | ISO 180/1U | 37 kJ/m² | |
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 6.0 kJ/m² |
| 23°C | ISO 179/1eA | 7.0 kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 45 kJ/m² |
| 23°C | ISO 179/1eU | 45 kJ/m² | |
| Impact strength of cantilever beam gap | -30°C | ASTM D256 | 74 J/m |
| 23°C | ASTM D256 | 74 J/m | |
| -30°C | ISO 180/1A | 6.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | -- | IEC 60112 | V |
| 解决方案B | IEC 60112 | V | |
| dielectric strength | 1.60mm,在油中 | IEC 60243-1 | 25 KV/mm |
| 3.20mm,在油中 | IEC 60243-1 | 17 KV/mm | |
| relative permittivity | 50Hz | IEC 60250 | 3.10 |
| 60Hz | IEC 60250 | 3.10 | |
| 1MHz | IEC 60250 | 3.00 | |
| Dissipation Factor | 50Hz | IEC 60250 | 1E-03 |
| 60Hz | IEC 60250 | 1E-03 | |
| 1MHz | IEC 60250 | 0.014 | |
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
| volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| dielectric strength | 0.800mm,在油中 | IEC 60243-1 | 30 KV/mm |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.39 g/cm³ | |
| ISO 1183 | 1.39 g/cm³ | ||
| melt mass-flow rate | 250°C/1.2kg | ASTM D1238 | 10 g/10min |
| Melt volume flow rate | 250°C/1.2kg | ISO 1133 | 9.00 cm3/10min |
| shrinkage rate | MD：--2 | 内部方法 | 0.60-0.90 % |
| MD：3.20mm | 内部方法 | 0.60-1.6 % | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.070 % |
| shrinkage rate | TD2 | 内部方法 | 0.70-1.0 % |
| Water absorption rate | 饱和,23°C | ISO 62 | 0.20 % |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| flexural modulus | ISO 178 | 3500 Mpa | |
| bending strength | ISO 178 | 110 Mpa | |
| Yield,50.0mmSpan | ASTM D790 | 110 Mpa | |
| Tensile modulus | ASTM D638 | 4600 Mpa | |
| ISO 527-2/1 | 4500 Mpa | ||
| tensile strength | 屈服 | ASTM D638 | 75.0 Mpa |
| 屈服 | ISO 527-2/5 | 72.0 Mpa | |
| Break | ASTM D638 | 75.0 Mpa | |
| 断裂 | ISO 527-2/5 | 72.0 Mpa | |
| elongation | 屈服 | ASTM D638 | 3.0 % |
| Tensile strain | 屈服 | ISO 527-2/5 | 4.0 % |
| elongation | 断裂 | ASTM D638 | 3.0 % |
| Tensile strain | 断裂 | ISO 527-2/5 | 4.0 % |
| flexural modulus | 50.0mmSpan | ASTM D790 | 3940 Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top