Technical Data Sheet Compareimpact performance Test Condition Test Method Test Result Suspended wall beam without notch impact strength 6.40mm ASTM D256 270 J/m
flammability Test Condition Test Method Test Result Extreme Oxygen Index ISO 489 44 % UL flame retardant rating 0.30mm UL 94 V-0
mechanical properties Test Condition Test Method Test Result tensile strength Yield ASTM D638 130 Mpa elongation Break ASTM D638 4.5 % Bending modulus 23°C ASTM D790 12500 Mpa bending strength Yield,23°C ASTM D790 140 Mpa shear strength ASTM D732 54.0 Mpa
thermal performance Test Condition Test Method Test Result Hot deformation temperature 1.8MPa,Unannealed ASTM D648 270 °C Linear coefficient of thermal expansion TD:150°C Internal Method 8.1E-05 cm/cm/°C Linear coefficient of thermal expansion MD:150°C Internal Method 4E-06 cm/cm/°C
Physical properties Test Condition Test Method Test Result Shrinkage rate MD Internal Method 0.17 % Shrinkage rate TD Internal Method 0.40 % Water absorption rate Saturation ASTM D570 0.020 %
Electrical performance Test Condition Test Method Test Result Dielectric constant 1MHz ASTM D150 3.80 Compared to the anti leakage trace index IEC 60112 PLC 3 Arc resistance ASTM D495 140 sec Dissipation factor 1.00GHz ASTM D150 4E-03 Dissipation factor 1MHz ASTM D150 0.038 Dielectric constant 1.00GHz ASTM D150 3.60 Volume resistivity ASTM D257 1E+15 ohms·cm
hardness Test Condition Test Method Test Result Rockwell hardness R-Scale ASTM D785 97
Supplementary Information Test Condition Test Method Test Result Solder resistance Internal Method 280 °C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.