Technical Data Sheet hardness Test Condition Test Method Test Result Rockwell hardness M-Scale ASTM D785 85 Rockwell hardness M -Sale ISO 2039-2 85
thermal performance Test Condition Test Method Test Result Linear coefficient of thermal expansion 干 ASTM D-696 4 ×10-5/K Hot deformation temperature 1.82MPa,干 ASTM D-648 191(250) °C Combustibility (rate) UL 94 HB Hot deformation temperature HDT ASTM D648/ISO 75 191 ℃（℉） Linear coefficient of thermal expansion ASTM D696/ISO 11359 4 mm/mm.℃ Hot deformation temperature 0.45 MPa, Unannealed ASTM D648 250 °C Hot deformation temperature 0.45 MPa, Unannealed ISO 75-2/B 249 °C Hot deformation temperature 1.8 MPa, Unannealed ASTM D648 191 °C Hot deformation temperature 1.8 MPa, Unannealed ISO 75-2/A 188 °C Linear coefficient of thermal expansion Flow ASTM D696 4.0E-5 cm/cm/°C
other Test Condition Test Method Test Result characteristic 电气特性 purpose 自动车电装部件
flammability Test Condition Test Method Test Result UL flame retardant rating 0.75 mm UL 94 HB
Basic Performance Test Condition Test Method Test Result Water absorption rate 湿 1.5 %
Physical properties Test Condition Test Method Test Result Shrinkage rate 干 旭化成方法 0.5-1.3 % Wear factor 湿 ASTM D-1044 8 ×10-6kg/1000times density ASTM D792/ISO 1183 1.48 Shrinkage rate ASTM D955 0.5-1.3 % Water absorption rate ASTM D570/ISO 62 1.5 % Shrinkage rate Flow Internal Method 0.50 - 1.3 % Water absorption rate Saturation, 23°C -- % Water absorption rate Equilibrium, 23°C, 50% RH ISO 62 -- %
Electrical performance Test Condition Test Method Test Result Arc resistance ASTM D495/IEC 60112 150
mechanical properties Test Condition Test Method Test Result Impact strength of cantilever beam gap 干(湿) ASTM D-256 34(39) J/m Rockwell hardness 干(湿) ASTM D-785 85(-) M Scale flexural coefficient 干(湿) ASTM D-790 5.9(2.9) GPa tensile strength 干(湿) ASTM D-638 88(64) Mpa bending strength 干(湿) ASTM D-790 147(93) Mpa Elongation at Break 干(湿) ASTM D-638 3(3.5) % Rockwell hardness ASTM D785 M85 Bending modulus ASTM D790/ISO 178 5880(MPa) kg·cm/cm(J/M)ft·lb/in bending strength ASTM D790/ISO 178 147(MPa) kg·cm/cm(J/M)ft·lb/in Tensile modulus 23°C ISO 527-2 7000 Mpa tensile strength Break, 23°C ISO 527-2 85.0 Mpa tensile strength -- ASTM D638 88.0 Mpa elongation Break ASTM D638 3.0 % elongation Break, 23°C ISO 527-2 2.0 % Bending modulus -- ASTM D790 5900 Mpa Bending modulus 23°C ISO 178 7400 Mpa bending strength -- ASTM D790 147 Mpa bending strength 23°C ISO 178 140 Mpa Taber abraser 1000 Cycles ASTM D1044 -- mg
impact performance Test Condition Test Method Test Result Impact strength of simply supported beam without notch ISO 179 51 kJ/m²
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
