PPO NORYL™ PX9406-701 SABIC INNOVATIVE JAPAN
311
- Unit Price:US$ 3,515 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:15MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Flame retardant
- Application Areas:Household appliances｜Household appliances｜Automotive interior parts｜Electronic communication accessories｜Electronic communication accessories
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | 内部方法 | 0.50 - 0.70 % | |
| 内部方法 | 0.50 - 0.70 % | ||
| Water absorption rate | ASTM D570 | 0.060 % | |
| Outdoor applicability | UL 746C | f2 |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 75.0 Mpa | |
| ASTM D638 | 55.0 Mpa | ||
| elongation | ASTM D638 | 9.5 % | |
| ASTM D638 | 18 % | ||
| Flexural modulus | ASTM D790 | 2640 Mpa | |
| bending strength | ASTM D790 | 111 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D4812 | 1100 J/m | |
| Dart impact | ASTM D3763 | 42.0 J |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | > 1.0E+16 ohms | |
| Volume resistivity | ASTM D257 | 2.0E+16 ohms·cm | |
| dielectric strength | ASTM D149 | 19 KV/mm | |
| dielectric constant | ASTM D150 | 2.57 | |
| ASTM D150 | 2.57 | ||
| ASTM D150 | 2.49 | ||
| Dissipation Factor | ASTM D150 | 5.2E-3 | |
| ASTM D150 | 5.2E-3 | ||
| ASTM D150 | 2.6E-3 | ||
| arc resistance | ASTM D495 | PLC 6 | |
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 2 | |
| High arc combustion index (HAI) | UL 746 | PLC 0 | |
| High Voltage Arc Traceability Rate (HVTR) | UL 746 | PLC 4 | |
| Hot wire ignition (HWI) | UL 746 | PLC 0 |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 105 to 110 °C | ||
| drying time | 3.0 to 4.0 hr | ||
| Suggested maximum moisture content | 0.020 % | ||
| Suggested injection volume | 30 to 70 % | ||
| Temperature at the rear of the barrel | 245 to 295 °C | ||
| Temperature in the middle of the barrel | 255 to 300 °C | ||
| Temperature at the front of the material cylinder | 265 to 305 °C | ||
| Spray nozzle temperature | 275 to 305 °C | ||
| Processing (melt) temperature | 275 to 305 °C | ||
| Temperature | 70 to 100 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| screw speed | 20 to 100 rpm | ||
| Exhaust hole depth | 0.038 to 0.051 mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 133 °C | |
| ASTM D648 | 122 °C | ||
| vicat | ASTM D15255 | 150 °C | |
| RTI Elec | UL 746 | 110 °C | |
| RTI Imp | UL 746 | 105 °C | |
| RTI | UL 746 | 110 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top