Material Properties:High impact resistance|Flame retardant
Application Areas:Automotive Applications|Casters
Color:--
Grade:--
Technical Data Sheet
optical performance
Test Condition
Test Method
Test Result
transmissivity
1000μm
ISO 13468-2
90.0 %
Refractive index
ISO 489
1.581
impact performance
Test Condition
Test Method
Test Result
Impact strength of simply supported beam without notch
23°C
ISO 179/1eU
NoBreak
Impact strength of simply supported beam without notch
-30°C
ISO 179/1eU
NoBreak
flammability
Test Condition
Test Method
Test Result
Extreme Oxygen Index
ISO 4589-2
24 %
Burning wire flammability index
IEC 60695-2-12
850 °C
UL flame retardant rating
3.0mm
UL 94
HB
UL flame retardant rating
1.5mm
UL 94
HB
mechanical properties
Test Condition
Test Method
Test Result
bending strength
23°C
ISO 178
95.0 Mpa
Bending modulus
23°C
ISO 178
2200 Mpa
Tensile modulus
23°C
ISO 527-2/1
2300 Mpa
tensile strength
Yield,23°C
ISO 527-2/50
65.0 Mpa
Tensile strain
Yield,23°C
ISO 527-2/50
7.0 %
Nominal tensile fracture strain
23°C
ISO 527-2/50
>50 %
thermal performance
Test Condition
Test Method
Test Result
Linear coefficient of thermal expansion
TD:23to55°C
ISO 11359-2
7E-05 cm/cm/°C
Linear coefficient of thermal expansion
MD:23to55°C
ISO 11359-2
7E-05 cm/cm/°C
Vicat softening temperature
ISO 306/B120
159 °C
Hot deformation temperature
1.8MPa,Unannealed
ISO 75-2/A
139 °C
Hot deformation temperature
0.45MPa,Unannealed
ISO 75-2/B
151 °C
Physical properties
Test Condition
Test Method
Test Result
Melt Volume Flow Rate (MVR)
330°C/2.16kg
ISO 1133
25.0 cm3/10min
density
23°C
ISO 1183
1.18 g/cm³
melt mass-flow rate
330°C/2.16kg
ISO 1133
26 g/10min
Shrinkage rate
TD:2.00mm
ISO 294-4
0.75 %
Shrinkage rate
MD:2.00mm
ISO 294-4
0.75 %
Water absorption rate
Saturation,23°C
ISO 62
0.40 %
Water absorption rate
Equilibrium,23°C,50%RH
ISO 62
0.20 %
Electrical performance
Test Condition
Test Method
Test Result
Dielectric strength
23°C,1.00mm
IEC 60243-1
35 KV/mm
Relative permittivity
23°C,100Hz
IEC 60250
3.00
Relative permittivity
23°C,1MHz
IEC 60250
3.00
Volume resistivity
23°C
IEC 60093
1E+16 ohms·cm
Surface resistivity
IEC 60093
1E+16 ohms
Compared to the anti leakage trace index
SolutionB
IEC 60112
PLC 4
Compared to the anti leakage trace index
SolutionA
IEC 60112
PLC 2
Dissipation factor
23°C,1MHz
IEC 60250
8.7E-03
Dissipation factor
23°C,100Hz
IEC 60250
1.6E-03
hardness
Test Condition
Test Method
Test Result
Ball Pressure Test
ISO 2039-1
115 Mpa
Supplementary Information
Test Condition
Test Method
Test Result
Electrolytic corrosion
23°C
IEC 60426
A1
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.