ABS CYCOLAC™ MG47F-NA1000 SABIC INNOVATIVE US
252
- Unit Price:US$ 1,906 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:10MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:High impact resistance
- Application Areas:Electronic field｜Automotive sector
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 5.6 g/10 min | |
| ISO 1133 | 18 g/10 min | ||
| Shrinkage rate | 内部方法 | 0.50 - 0.80 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 112 |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 2270 Mpa | |
| ISO 527-2/1 | 2370 Mpa | ||
| tensile strength | ASTM D638 | 44.0 Mpa | |
| ISO 527-2/50 | 47.0 Mpa | ||
| ASTM D638 | 33.0 Mpa | ||
| ISO 527-2/50 | 35.0 Mpa | ||
| elongation | ASTM D638 | 2.0 % | |
| ISO 527-2/50 | 2.6 % | ||
| ASTM D638 | 24 % | ||
| ISO 527-2/50 | 25 % | ||
| Flexural modulus | ASTM D790 | 2300 Mpa | |
| ISO 178 | 2200 Mpa | ||
| bending strength | ISO 178 | 70.0 Mpa | |
| ASTM D790 | 70.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 9.0 kJ/m² | |
| ISO 179/1eA | 26 kJ/m² | ||
| Dart impact | ASTM D3763 | 30.0 J |
| Filling analysis | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt viscosity | ASTM D3835 | 225 Pa·s |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| arc resistance | ASTM D495 | PLC 6 | |
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 0 | |
| High arc combustion index (HAI) | UL 746 | PLC 0 | |
| High Voltage Arc Traceability Rate (HVTR) | UL 746 | PLC 3 | |
| Hot wire ignition (HWI) | UL 746 | PLC 3 |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 80 to 95 °C | ||
| drying time | 2.0 to 4.0 hr | ||
| Suggested maximum moisture content | 0.10 % | ||
| Suggested injection volume | 50 to 70 % | ||
| Temperature at the rear of the barrel | 190 to 210 °C | ||
| Temperature in the middle of the barrel | 205 to 225 °C | ||
| Temperature at the front of the material cylinder | 215 to 240 °C | ||
| Spray nozzle temperature | 220 to 260 °C | ||
| Processing (melt) temperature | 220 to 260 °C | ||
| Temperature | 50 to 70 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| screw speed | 30 to 60 rpm | ||
| Exhaust hole depth | 0.038 to 0.051 mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 94.0 °C | |
| ASTM D648 | 80.0 °C | ||
| ISO 75-2/Af | 81.0 °C | ||
| vicat | ASTM D15258 | 99.0 °C | |
| ISO 306/B50 | 98.0 °C | ||
| ISO 306/B120 | 100 °C | ||
| Linear coefficient of thermal expansion | ASTM E831 | 8.8E-5 cm/cm/°C | |
| ASTM E831 | 8.8E-5 cm/cm/°C | ||
| RTI Elec | UL 746 | 60.0 °C | |
| RTI Imp | UL 746 | 60.0 °C | |
| RTI | UL 746 | 60.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top