Material Properties:Dimensional stability｜Oil resistant｜High rigidity｜Filler: Glass fiber reinforced material｜35% filler by weight
Application Areas:Mechanical components｜Electrical components｜Shell｜Automotive sector｜container
Color:--
Grade:Enhanced level

Material Certification

Technical Data Sheet Compare

hardness	Test Condition	Test Method	Test Result
ball-indentation hardness			222.76to370.34 MPa

thermal performance	Test Method	Test Result
Continuous use temperature	°C	110to220
8.0Mpa, Not annealed	°C	65to220
1.8MPa, Not annealed	°C	230to250
horizontal	mm/mm/°C	68.6E-5-127.0E-5
flow	mm/mm/°C	142.2E-5-203.2E-5
melting temperature	°C	260

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength	23℃	kJ/m²	3.065to3.343
Impact strength of simply supported beam without notch	23℃	kJ/m²	11.143to19.964

Physical properties	Test Condition	Test Method	Test Result
density	23℃	g/cm³	1.28-1.85
Balance, 23 ℃, 50% RH		%	1.2to1.5
shrinkage rate	23℃	%	0.10-0.31
Saturation, 23 ℃		%	3.5to5.0

Electrical performance	Test Condition	Test Method	Test Result
dielectric strength	23℃	V/mil	840
volume resistivity	23℃	ohms·cm	1.0E+12-1.0E+14

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	断裂,23℃		144.83to292.41 MPa
Tensile modulus	23℃		8206.9to28000.0 MPa
Tensile strain	断裂,23℃	%	1.9to3.1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top