thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	0.45 MPa, 未退火, 3.20 mm	ASTM D648	115 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.8 MPa, 未退火, 3.20 mm	ASTM D648	98.0 °C
vicat		ASTM D15255	111 °C
Linear coefficient of thermal expansion	流动 : -40 到 40°C	ASTM E831	7.2E-5 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	横向 : -40 到 40°C	ASTM E831	9.0E-5 cm/cm/°C
thermal conductivity		ASTM C177	0.20 W/m/K

Impact resistance	Test Condition	Test Method	Test Result
Dart impact	-30°C, Total Energy	ASTM D3763	33.0 J
Dart impact	Dart impact	23°C, Total Energy	ASTM D3763	40.0 J

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	260°C/5.0 kg	ASTM D1238	14 g/10 min
shrinkage rate	流动 : 3.20 mm	内部方法	0.50 - 0.80 %
shrinkage rate	shrinkage rate	横向流动 : 3.20 mm	内部方法	0.50 - 0.70 %
Water absorption rate	24 hr	ASTM D570	0.10 %

injection	Test Condition	Test Method	Test Result
drying temperature			100 to 105 °C
drying time			3.0 to 4.0 hr
Suggested maximum moisture content			0.020 %
Suggested injection volume			30 to 80 %
Temperature at the rear of the barrel			250 to 280 °C
Temperature in the middle of the barrel			255 to 290 °C
Temperature at the front of the material cylinder			255 to 290 °C
Spray nozzle temperature			260 to 290 °C
Processing (melt) temperature			260 to 290 °C
mold temperature			75 to 100 °C
Back pressure			0.300 to 0.700 Mpa
screw speed			40 to 70 rpm
Exhaust hole depth			0.038 to 0.076 mm

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTM D638	2130 Mpa
tensile strength	屈服	ASTM D638	50.0 Mpa
tensile strength	tensile strength	断裂	ASTM D638	44.0 Mpa
elongation	屈服	ASTM D638	8.6 %
elongation	elongation	断裂	ASTM D638	150 %
flexural modulus	50.0 mm 跨距	ASTM D790	2060 Mpa
bending strength	屈服, 50.0 mm 跨距	ASTM D790	72.0 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top