PC EXL1414T-NA8A005T SABIC INNOVATIVE NANSHA
188
- Unit Price:US$ 4,646 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:60MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:--
- Application Areas:--
- Color:--
- Grade:--
Technical Data Sheet
Compare
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | L计秤 | ISO 2039-2 | 87 |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD:23到80°C | ISO 11359-2 | 6.7E-05 cm/cm/°C |
| TD:-40到95°C | ASTME831 | 8E-05 cm/cm/°C | |
| TD:23到80°C | ISO 11359-2 | 8E-05 cm/cm/°C | |
| RTI Elec | UL 746 | 130 °C | |
| RTI | UL 746 | 130 °C | |
| Heat Deflection Temperature | 1.8MPa,未退火,3.20mm | ASTM D648 | 121 °C |
| 1.8MPa,未退火,64.0mm跨距10 | ISO 75-2/Af | 116 °C | |
| vicat | -- | ASTMD152511 | 139 °C |
| -- | ISO 306/B50 | 138 °C | |
| ball-indentation hardness | 125°C | IEC 60695-10-2 | 通过 |
| Linear coefficient of thermal expansion | MD:-40到95°C | ASTME831 | 6.7E-05 cm/cm/°C |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| transmissivity | 2540µm | ASTM D1003 | 82.0 % |
| Haze ratio | 2540µm | ASTM D1003 | 3.0 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | HB |
| 3.0mm | UL 94 | V-2 | |
| Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 960 °C |
| Hot filament ignition temperature | 0.8mm | IEC 60695-2-13 | 850 °C |
| 3.0mm | IEC 60695-2-13 | 850 °C |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 60 kJ/m² |
| 23°C | ISO 179/1eA | 70 kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 无断裂 |
| 23°C | ISO 179/1eU | 无断裂 | |
| Impact strength of cantilever beam gap | -30°C | ASTM D256 | 710 J/m |
| 23°C | ASTM D256 | 820 J/m | |
| -30°C9 | ISO 180/1A | 55 kJ/m² | |
| 23°C9 | ISO 180/1A | 65 kJ/m² | |
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | 无断裂 |
| 23°C | ISO 180/1U | 无断裂 | |
| Dart impact | -30°C,TotalEnergy | ASTM D3763 | 77.4 J |
| 23°C,TotalEnergy | ASTM D3763 | 75.5 J |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | >1.0E+15 ohms | |
| volume resistivity | ASTM D257 | >1.0E+15 ohms·cm |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTMD792 | 1.19 g/cm³ | |
| melt mass-flow rate | 300°C/1.2kg | ASTM D1238 | 10 g/10min |
| Melt volume flow rate | 300°C/1.2kg | ISO 1133 | 9.50 cm3/10min |
| shrinkage rate | MD:3.20mm | 内部方法 | 0.40-0.80 % |
| TD:3.20mm | 内部方法 | 0.40-0.80 % | |
| Water absorption rate | 饱和,23°C | ISO 62 | 0.12 % |
| 平衡,23°C,50%RH | ISO 62 | 0.093 % |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | 屈服4 | ASTM D638 | 57.6 Mpa |
| 屈服 | ISO 527-2/50 | 56.8 Mpa | |
| 断裂4 | ASTM D638 | 59.1 Mpa | |
| 断裂 | ISO 527-2/50 | 55.3 Mpa | |
| elongation | 屈服4 | ASTM D638 | 5.6 % |
| 屈服 | ISO 527-2/50 | 5.4 % | |
| 断裂4 | ASTM D638 | 120 % | |
| 断裂 | ISO 527-2/50 | 110 % | |
| flexural modulus | 50.0mm跨距5 | ASTM D790 | 2180 Mpa |
| --6 | ISO 178 | 2120 Mpa | |
| bending strength | --6,7 | ISO 178 | 88.6 Mpa |
| 屈服,50.0mm跨距5 | ASTM D790 | 92.0 Mpa | |
| Tensile modulus | --3 | ASTM D638 | 2190 Mpa |
| -- | ISO 527-2/1 | 2310 Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top