flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	3.0 mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2/1A	2600	Mpa
tensile strength		ISO 527-2/1A	64.0	Mpa
Tensile strain	Yield	ISO 527-2/1A	10	%
Bending modulus		ISO 178	2450	Mpa
injection	Test Condition	Test Method	Test Result	Test Unit
Temperature at the rear of the barrel			170 to 180	°C
Temperature in the middle of the barrel			180 to 190	°C
Temperature at the front of the material cylinder			180 to 190	°C
Mold temperature			60 to 90	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190°C/2.16 kg	ISO 1133	10	g/10 min
Shrinkage rate	2.00 mm，Flow	Internal Method	1.7 - 2.2	%
Water absorption rate	Saturation, 23°C	ISO 62	0.80	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.20	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top