Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate		ASTM D-570	0.02	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	Notched23℃	ASTM D-256	100	J/m
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	Unnotched23℃	ASTM D-256	30	KJ/m
bending strength		ASTM D-790	14.7	GPa
Elongation at Break		ASTM D-732	75
tensile strength		ASTM D-638	1.5	%
tensile strength	tensile strength		ASTM D-638	140	Mpa
limiting pv value		东丽法	815	KJ/m
Friction coefficient	对钢	ASTM D-1894	0.25
bending strength		ASTM D-790	200	Mpa
Shore hardness		ASTM D-785	122	洛氏
abrasion		ASTM D-1044	50	mg/1000回
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	Flow	ASTM D-696	2.2
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	垂重方向	ASTM D-696	3.3
Melting temperature		DSC	278	°C
Hot deformation temperature	1.82MPa	ASTM D-648	>260	°C
Combustibility		UL -94	V-0
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	Flow	东丽法	0.20	%
Shrinkage rate	Shrinkage rate	垂重方向	东丽法	0.70	%
	320℃,98MPa,1mm厚，Flow长	东丽法	155
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Inherent resistance of volume		ASTM D-257	10	Ω.m
Dielectric strength		ASTM D-149	21	MV/m
Arc resistance	W电极	ASTM D-495	127	秒
Induced positive connection	10	ASTM D-150	0.002
Dielectric constant	10	ASTM D-150	3.8

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top