PBT LEXAN™ 310SEO-7001 SABIC INNOVATIVE THAILAND

356

Unit Price:US$ 3,340 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
33MT
Delivery Terms:
FOB
Port of Loading :
Shenzhen Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

+86 ********View

For more details, please contact the supplier!

Material Description

Material Properties:Flame retardant
Application Areas:Industrial applications｜switch｜Shell｜Electronic field｜Electrical field
Color:--
Grade:Injection grade

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
Suspended wall beam without notch impact strength	23°C	ASTM D4812	无断裂
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	-30°C9	ISO 180/1U	无断裂
Dart impact	23°C, Total Energy	ASTM D3763	200	J
flammability	Test Condition	Test Method	Test Result	Test Unit
Extreme Oxygen Index		ISO 4589-2	30	%
Burning wire flammability index	1.0 mm	IEC 60695-2-12	960	°C
UL flame retardant rating	3.0 mm	UL 94	5VA
UL flame retardant rating	UL flame retardant rating	0.71 mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	--3	ASTM D638	2820	Mpa
Tensile modulus	Tensile modulus	--	ISO 527-2/1	2800	Mpa
tensile strength	Yield4	ASTM D638	58.0	Mpa
	tensile strength	Yield	ISO 527-2/50	58.0	Mpa
		tensile strength	Break4	ASTM D638	52.0	Mpa
		tensile strength	tensile strength	Break	ISO 527-2/50	40.0	Mpa
elongation	Yield4	ASTM D638	5.0	%
	elongation	Yield	ISO 527-2/50	5.0	%
		elongation	Break4	ASTM D638	18	%
		elongation	elongation	Break	ISO 527-2/50	18	%
Bending modulus	50.0 mm Span5	ASTM D790	2620	Mpa
Bending modulus	Bending modulus	--6	ISO 178	2600	Mpa
bending strength	--6,7	ISO 178	90.0	Mpa
bending strength	bending strength	Yield, 50.0 mm Span5	ASTM D790	101	Mpa
Taber abraser	1000 Cycles, 1000 g, CS-17 Wheel	Internal Method	19.0	mg
injection	Test Condition	Test Method	Test Result	Test Unit
Spray nozzle temperature			240 to 255	°C
Processing (melt) temperature			245 to 260	°C
Mold temperature			50 to 75	°C
Temperature at the front of the material cylinder			245 to 260	°C
Suggested maximum moisture content			0.020	%
drying time			3.0 to 4.0	hr
drying temperature			120	°C
Temperature in the middle of the barrel			240 to 255	°C
Temperature at the rear of the barrel			230 to 250	°C
Suggested injection volume			40 to 80	%
Back pressure			0.300 to 0.700	Mpa
Screw speed			50 to 100	rpm
Exhaust hole depth			0.013 to 0.025	mm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed, 6.40 mm	ASTM D648	162	°C
	Hot deformation temperature	0.45 MPa, Unannealed, 4.00 mm, 100 mm Span10	ISO 75-2/Be	150	°C
		Hot deformation temperature	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	74.0	°C
			Hot deformation temperature	1.8 MPa, Unannealed, 6.40 mm	ASTM D648	71.0	°C
				Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 100 mm Span10	ISO 75-2/Ae	60.0	°C
				Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span9	ISO 75-2/Af	73.0	°C
Vicat softening temperature	--	ASTM D152511	170	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/A50	212	°C
Ball Pressure Test	123 to 127°C	IEC 60695-10-2	通过
Linear coefficient of thermal expansion	Flow : -40 to 40°C	ASTM E831	7.9E-5	cm/cm/°C
	Linear coefficient of thermal expansion	Flow : 60 to 138°C	ASTM E831	1.3E-4	cm/cm/°C
		Linear coefficient of thermal expansion	Flow : -40 to 40°C	ISO 11359-2	7.6E-5	cm/cm/°C
			Linear coefficient of thermal expansion	Flow : 23 to 60°C	ISO 11359-2	1.0E-4	cm/cm/°C
				Linear coefficient of thermal expansion	Across Flow : -40 to 40°C	ASTM E831	7.9E-5	cm/cm/°C
					Linear coefficient of thermal expansion	Across Flow : -40°C	ISO 11359-2	7.3E-5	cm/cm/°C
					Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow : 23 to 60°C	ISO 11359-2	1.0E-4	cm/cm/°C
thermal conductivity		ISO 8302	0.24	W/m/K
RTI Elec		UL 746	120	°C
RTI Imp		UL 746	120	°C
RTI		UL 746	140	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Specific volume		ASTM D792	0.710	cm³/g
melt mass-flow rate	250°C/2.16 kg	ASTM D1238	8.6	g/10 min
Melt Volume Flow Rate (MVR)	250°C/2.16 kg	ISO 1133	8.00	cm3/10min
Shrinkage rate	Flow 2	Internal Method	1.1 - 1.8	%
	Shrinkage rate	Flow : 0.750 to 2.30 mm	Internal Method	0.90 - 1.6	%
		Shrinkage rate	Flow : 3.20 mm	Internal Method	1.5 - 2.3	%
			Shrinkage rate	Flow : 2.30 to 4.60 mm	Internal Method	1.5 - 2.3	%
				Shrinkage rate	Across FlowFlow 2	Internal Method	0.90 - 1.9	%
					Shrinkage rate	Across FlowFlow : 0.750 to 2.30 mm	Internal Method	1.0 - 1.7	%
					Shrinkage rate	Shrinkage rate	Across FlowFlow : 2.30 to 4.60 mm	Internal Method	1.6 - 2.4	%
Water absorption rate	Saturation, 23°C	ISO 62	0.36	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.080	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	> 1.0E+15	ohms
Volume resistivity		IEC 60093	> 1.0E+15	ohms·cm
Dielectric strength	1.60 mm, in Oil	ASTM D149	24	KV/mm
	Dielectric strength	3.20 mm, in Air	ASTM D149	18	KV/mm
		Dielectric strength	0.800 mm, in Oil	IEC 60243-1	35	KV/mm
			Dielectric strength	1.00 mm12	IEC 60243-1	18	KV/mm
				Dielectric strength	1.60 mm, in Oil	IEC 60243-1	25	KV/mm
				Dielectric strength	Dielectric strength	3.20 mm, in Oil	IEC 60243-1	17	KV/mm
Relative permittivity	50 Hz	IEC 60250	2.90
	Relative permittivity	60 Hz	IEC 60250	2.90
	Relative permittivity	Relative permittivity	100 Hz	IEC 60250	3.10
Compared to the anti leakage trace index	Solution B	IEC 60112	PLC 4
	Compared to the anti leakage trace index	--	IEC 60112	PLC 3
	Compared to the anti leakage trace index	Compared to the anti leakage trace index		UL 746	PLC 3
Arc resistance		ASTM D495	PLC 6
Dissipation factor	1 MHz	IEC 60250	0.013
	Dissipation factor	100 Hz	IEC 60250	2.0E-3
		Dissipation factor	60 Hz	IEC 60250	1.0E-3
		Dissipation factor	Dissipation factor	50 Hz	IEC 60250	1.0E-3
Relative permittivity	1 MHz	IEC 60250	2.80
Hot wire ignition		UL 746	PLC 2
High voltage arc tracing rate		UL 746	PLC 4
High Voltage Arc Resistance Index (HVAR) (PLC)		UL 746	PLC 6
High arc combustion index		UL 746	PLC 0
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R -Sale	ISO 2039-2	120
Ball Pressure Test	H 358/30	ISO 2039-1	105	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Other Prices

Supplier	Unit Price
Shenzhen Jufengde	US$ 3340 /MT

Supplier Join

Get App

Top

PBT LEXAN™ 310SEO-7001 SABIC INNOVATIVE THAILAND

Material Description

Technical Data Sheet

Other Prices

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index