Technical Data Sheet optical performance Test Condition Test Method Test Result Refractive index ASTM D542 1.586 transmissivity 2540 μm ASTM D1003 88.0 % turbidity 2540 μm ASTM D1003 1.0 %
impact performance Test Condition Test Method Test Result Suspended wall beam without notch impact strength 23°C ASTM D4812 3200 J/m Dart impact 23°C ASTM D3029 169 J Impact strength of cantilever beam gap ASTM D1822 546 kJ/m²
flammability Test Condition Test Method Test Result UL flame retardant rating 0.76 mm UL 94 HB
mechanical properties Test Condition Test Method Test Result tensile strength Yield ASTM D638 62.0 Mpa tensile strength Break ASTM D638 65.0 Mpa elongation Yield ASTM D638 7.0 % elongation Break ASTM D638 110 % Bending modulus 50.0 mm Span ASTM D790 2340 Mpa bending strength Yield, 50.0 mm Span ASTM D790 93.0 Mpa Taber abraser 1000 Cycles, 1000 g, CS-17 Wheel ASTM D1044 10.0 mg
injection Test Condition Test Method Test Result Back pressure 0.300 to 0.700 Mpa Exhaust hole depth 0.025 to 0.076 mm Screw speed 40 to 70 rpm Mold temperature 70 to 95 °C Spray nozzle temperature 275 to 300 °C drying time 3.0 to 4.0 hr drying temperature 120 °C Suggested maximum moisture content 0.020 % Temperature at the rear of the barrel 260 to 280 °C Suggested injection volume 40 to 60 % Temperature in the middle of the barrel 270 to 295 °C Temperature at the front of the material cylinder 280 to 305 °C Processing (melt) temperature 280 to 305 °C
thermal performance Test Condition Test Method Test Result RTI UL 746 130 °C RTI Imp UL 746 130 °C RTI Elec UL 746 130 °C Vicat softening temperature ASTM D15255 154 °C thermal conductivity ASTM C177 0.19 W/m/K specific heat ASTM C351 1250 J/kg/°C Linear coefficient of thermal expansion -40 to 95°C，Flow ASTM E831 6.8E-5 cm/cm/°C Hot deformation temperature 1.8 MPa, Unannealed, 6.40 mm ASTM D648 132 °C Hot deformation temperature 0.45 MPa, Unannealed, 6.40 mm ASTM D648 137 °C
Physical properties Test Condition Test Method Test Result Specific volume ASTM D792 0.830 cm³/g melt mass-flow rate 300°C/1.2 kg ASTM D1238 18 g/10 min Shrinkage rate 3.20 mm，Flow Internal Method 0.50 - 0.70 % Water absorption rate 24 hr ASTM D570 0.15 % Water absorption rate Equilibrium, 23°C ASTM D570 0.35 % Water absorption rate Equilibrium, 100°C ASTM D570 0.58 % Outdoor applicability UL 746C f1
Electrical performance Test Condition Test Method Test Result High arc combustion index UL 746 PLC 1 High voltage arc tracing rate UL 746 PLC 2 Hot wire ignition UL 746 PLC 4 Compared to the anti leakage trace index UL 746 PLC 2 Dissipation factor 60 Hz ASTM D150 9.0E-4 Dissipation factor 50 Hz ASTM D150 9.0E-4 Dielectric constant 1 MHz ASTM D150 2.96 Dielectric constant 50 kHz ASTM D150 3.17 Dielectric constant 60 Hz ASTM D150 3.17 Dielectric strength 3.20 mm, in Air ASTM D149 15 KV/mm Volume resistivity ASTM D257 > 1.0E+17 ohms·cm Dissipation factor 1 MHz ASTM D150 0.010
hardness Test Condition Test Method Test Result Rockwell hardness M-Scale ASTM D785 70 Rockwell hardness R-Scale ASTM D785 118
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
'%20/%3e%3cg%20opacity='1'%20transform='translate(150.5%200)%20rotate(0)'%3e%3cpath%20id='路径%204'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M494%20472.601L487%20410.101L460%20472.601L494%20472.601Z'%3e%3c/path%3e%3cpath%20id='路径%203'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M80%20620.761C152%20676.261%20250%20670.761%20264.5%20670.761C351%20664.261%20412.5%20636.261%20443.5%20620.761C536%20572.261%20580.45%20516.261%20599.5%20492.261C566.05%20492.261%20483.5%20492.261%20465.5%20492.261C408%20532.761%20385.5%20541.761%20369%20550.261C262.5%20599.761%20214%20591.261%20184%20591.261C81%20584.761%2024.3%20510.211%200%20478.261C23%20580.261%2067.5%20609.261%2080%20620.761Z'%3e%3c/path%3e%3cpath%20id='路径%202'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M427.998%202.26C325.498%2014.26%20222.068%2073.64%20247.998%2063.76C384.498%2011.76%20427.998%2024.76%20437.998%2024.76C526.998%2041.76%20559.998%2085.76%20568.998%2095.76C606.498%20142.26%20611.398%20187.06%20613.498%20206.26C631.458%20206.26%20679.498%20206.26%20703.998%20206.26C692.998%20109.26%20633.378%2063.91%20622.998%2056.26C563.998%2012.76%20513.248%205.41%20491.498%202.26C467.498%20-2.24%20437.168%201.19%20427.998%202.26Z'%3e%3c/path%3e%3cpath%20id='路径%201'%20fill-rule='evenodd'%20style='fill:%23C70000'%20opacity='1'%20d='M232%20206.763C243%20178.763%20262%20156.763%20273.5%20140.263C329%2080.2634%20374%2069.7634%20410.5%2061.2634C446.5%2052.2634%20499%2061.2634%20504.5%2061.2634C446%2039.7634%20393%2040.7634%20387.5%2040.7634C308.5%2047.2634%20259.5%2075.2634%20237%2088.7634C162.5%20135.263%20122.95%20185.313%20106%20206.763C139.86%20206.763%20221.5%20206.763%20232%20206.763Z'%3e%3c/path%3e%3c/g%3e%3cpath%20id='减去顶层'%20fill-rule='evenodd'%20style='fill:%23003686'%20opacity='1'%20d='M379.519,227.698l4.237,4.101l-38.576,198.188h98.804l3.966,3.839l-7.614,38.817h-147.091l-4.064,-3.934l46.975,-241.011zM900.883,363.706c-21,-8.75%20-34.89067,-17.22667%20-41.672,-25.43c-6.78133,-8.20333%20-10.172,-19.19533%20-10.172,-32.976c0,-24.06267%208.832,-43.75033%2026.496,-59.063c17.664,-15.312%2040.55067,-22.968%2068.66,-22.968c11.266,0%2022.231,1.121%2032.895,3.363c10.664,2.242%2020.974,5.60533%2030.93,10.09l-8.139,40.672l-5.05,2.827c-6.54467,-5.18467%20-13.96233,-9.21167%20-22.253,-12.081c-9.95333,-3.44533%20-21.00033,-5.168%20-33.141,-5.168c-12.906,0%20-23.406,3.08967%20-31.5,9.269c-8.09333,6.18%20-12.14,14.08233%20-12.14,23.707c0,9.18733%2010.06233,18.32%2030.187,27.398l1.149,0.493l19.031,8.367c15.96867,7.10933%2027.64433,15.668%2035.027,25.676c7.38267,10.00733%2011.074,22.28467%2011.074,36.832c0,25.156%20-8.80467,45.226%20-26.414,60.21c-17.60933,14.98467%20-41.39833,22.477%20-71.367,22.477c-12.03133,0%20-24.30867,-1.422%20-36.832,-4.266c-12.52333,-2.84333%20-25.56633,-7.16367%20-39.129,-12.961l8.62,-44.559l4.63,-2.592c9.52333,7.45333%2019.435,13.24467%2029.735,17.374c11.59333,4.64867%2023.24167,6.973%2034.945,6.973c14.54667,0%2025.97633,-3.19933%2034.289,-9.598c8.31267,-6.39867%2012.469,-15.06667%2012.469,-26.004c0,-6.78133%20-1.914,-12.66%20-5.742,-17.636c-3.82867,-4.97667%20-9.51633,-9.051%20-17.063,-12.223zM54.3672,227.698h68.9058c25.81267,0%2045.473,5.004%2058.981,15.012c13.50733,10.008%2020.261,24.58233%2020.261,43.723c0,12.46867%20-1.996,24.82767%20-5.988,37.077c-3.992,12.25%20-9.16,21.98467%20-15.504,29.204c-8.53133,9.95267%20-19.14067,17.14433%20-31.828,21.575c-12.68733,4.42867%20-29.14817,6.643%20-49.3825,6.643h-26.9063l-17.8828,91.711h-43.7778l-3.88732,-3.761zM642.062,227.698h59.063l18.238,240.969l-4.109,3.976h-43.66l-2.297,-60.539h-0.041l-1.756,-40.844l-0.04,-0.002l-3.249,-98.607l-41.151,94.615l-0.06,-0.006l-20.5,47.5h0.005l-25.411,57.883h-43.849l-3.589,-3.474zM94.7266,268.386l-13.7813,71.859h23.4607c15.96867,0%2027.918,-3.69133%2035.848,-11.074c7.92933,-7.38267%2011.894,-18.457%2011.894,-33.223c0,-9.95333%20-2.84367,-17.03533%20-8.531,-21.246c-5.68733,-4.21067%20-15.367,-6.316%20-29.039,-6.316z'%3e%3c/path%3e%3c/svg%3e)
