Material Properties:Chemical resistance｜High rigidity｜wear resistant｜Oil resistant｜high strength｜Thermal stability｜High toughness｜High liquidity｜toughness｜Chemical resistance
Application Areas:Industrial applications｜Electrical applications｜Automotive Applications｜Industrial machinery｜Fitness equipment｜Injection molding applications with basic engineering characteristics
Color:--
Grade:Injection grade

Material Certification

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
Shrinkage rate		ISO 294-4	1.4 %
Shrinkage rate	Shrinkage rate		ISO 294-4	1.6 %
Water absorption rate		ISO 62	1.1 %
Water absorption rate	Water absorption rate		ISO 62	2.4 %
density		ISO 1183	1.14 g/cm³

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ISO 527	83 Mpa
elongation		ISO 527	40 %
Tensile modulus		ISO 527	3000 Mpa
Flexural modulus		ISO 178	2900 Mpa
bending strength		ISO 178	35 Mpa
Impact strength of simply supported beam without notch		ISO 179	6.6 kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch		ISO 179	5.3 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
dielectric strength		IEC 60243	20 KV/mm
Volume resistivity		IEC 60093	4 ohm-cm×1015

Thermal performance	Test Condition	Test Method	Test Result
melting temperature		ISO 3146	260 °C
Heat distortion temperature		ISO 75	70 °C
Heat distortion temperature	Heat distortion temperature		ISO 75	200 °C
UL flame retardant rating		UL 94	V-2

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top