
POM KEPITAL® F30-02 KEP KOREA
464
- Unit Price:US$ 2,220 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:60MT
- Delivery Terms:FOB
- Port of Loading :Shenzhen Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
+86 ********View
For more details, please contact the supplier!
Material Description
- Material Properties:wear resistant|Chemical resistance|Thermal stability|Anti creep|Good liquidity|Good forming performance|Low viscosity
- Application Areas:Automotive sector|Thin walled components
- Color:--
- Grade:Injection grade
Material Certification

Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL 94 | HB | |
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | Equilibrium,23℃,60%rh | ASTM D570 | 0.22 | % |
| Shrinkage rate | flow,3.00MM | ASTM D955 | 2.0 | % |
| melt mass-flow rate | ASTM D1238 | 27 | g/10 min | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| shear strength | 2.00mm | ASTM D732 | 55.0 | MPa |
| Bending modulus | 23°C | ASTM D790 | 2650 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | flow,20 to 80°C | ASTM D696 | 0.00013 | cm/cm/°C |
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D648 | 158 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric loss | 1E+6 Hz | ASTM D150 | 0.0070 | |
| Dielectric constant | 1E+6 Hz | ASTM D150 | 3.70 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.