other	Test Condition	Test Method	Test Result	Test Unit
characteristic			电气特性
purpose			自动车电装部件
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	湿		1.4	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness		ASTM D785	M90
Bending modulus		ASTM D790/ISO 178	8830(MPa)	kg·cm/cm(J/M)ft·lb/in
bending strength		ASTM D790/ISO 178	191(MPa)	kg·cm/cm(J/M)ft·lb/in
tensile strength	干(湿)	ASTM D-638	128(98)	Mpa
flexural coefficient	干(湿)	ASTM D-790	8.8(5.8)	GPa
Impact strength of cantilever beam gap	干(湿)	ASTM D-256	36(39)	J/m
Rockwell hardness	干(湿)	ASTM D-785	90(-)	R scale
Elongation at Break	干(湿)	ASTM D-638	3(3.5)	%
bending strength	干(湿)	ASTM D-790	191(157)	Mpa
tensile strength	Yield，23°C	ASTM D638	128	Mpa
Elongation at Break	23°C	ASTM D638	3.0	%
bending strength	23°C	ASTM D790	191	Mpa
Bending modulus	23°C	ASTM D790	8800	Mpa
Impact strength of cantilever beam gap	23°C	ASTM D256	36.0	J/m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Combustibility (rate)		UL 94	HB
Hot deformation temperature	HDT	ASTM D648/ISO 75	245	℃（℉）
	Hot deformation temperature	1.82MPa,干	ASTM D-648	245	°C
		Hot deformation temperature	0.46MPa,干	ASTM D-648	250	°C
			Hot deformation temperature	0.45MPaUnannealed	ASTM D648	250	°C
			Hot deformation temperature	Hot deformation temperature	1.80MPaUnannealed	ASTM D648	245	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792/ISO 1183	1.52
Shrinkage rate		ASTM D955	0.5-1.0	%
Water absorption rate		ASTM D570/ISO 62	1.4	%
Shrinkage rate	干	旭化成方法	0.5-1.0	%
	Shrinkage rate	MD	ASTM D995	0.50	%
	Shrinkage rate	Shrinkage rate	TD	ASTM D995	1.0	%
Water absorption rate	(23°C,50RH)	ASTM D570	1.4	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness		ASTM D785	90	M（Scale）

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top