PPO NORYL™ SE1X WH8632 SABIC INNOVATIVE SHANGHAI
196
- Unit Price:US$ 4,816 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:10MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:High temperature resistance｜Hydrolysis resistance
- Application Areas:Electronic and electrical components｜Mechanical component cover｜Household products
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | 内部方法 | 0.50 - 0.70 % | |
| 内部方法 | 0.50 - 0.70 % | ||
| Water absorption rate | ASTM D570 | 0.060 % | |
| Outdoor applicability | UL 746C | f1 |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| characteristic | 有突出的电绝缘和耐水优异.尺寸稳定好。 | ||
| Color | 灰白色 | ||
| purpose | IT办公 食品包装 |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-1 | |
| UL 94 | V-0 | ||
| Radiation board grade | RP100 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 67.0 Mpa | |
| ASTM D638 | 53.0 Mpa | ||
| elongation | ASTM D638 | 8.1 % | |
| ASTM D638 | 20 % | ||
| Flexural modulus | ASTM D790 | 2500 Mpa | |
| bending strength | ASTM D790 | 102 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dart impact | ASTM D3763 | 32.0 J | |
| ASTM D3763 | 51.0 J |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | > 1.0E+15 ohms | |
| Volume resistivity | ASTM D257 | 2.3E+16 ohms·cm | |
| dielectric strength | ASTM D149 | 18 KV/mm | |
| dielectric constant | ASTM D150 | 2.52 | |
| ASTM D150 | 2.52 | ||
| ASTM D150 | 2.46 | ||
| Dissipation Factor | ASTM D150 | 3.4E-3 | |
| ASTM D150 | 3.4E-3 | ||
| ASTM D150 | 2.1E-3 | ||
| arc resistance | ASTM D495 | PLC 6 | |
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 1 | |
| High Voltage Arc Traceability Rate (HVTR) | UL 746 | PLC 4 |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 105 to 110 °C | ||
| drying time | 3.0 to 4.0 hr | ||
| Suggested maximum moisture content | 0.020 % | ||
| Suggested injection volume | 30 to 70 % | ||
| Temperature at the rear of the barrel | 250 to 300 °C | ||
| Temperature in the middle of the barrel | 260 to 305 °C | ||
| Temperature at the front of the material cylinder | 270 to 310 °C | ||
| Spray nozzle temperature | 280 to 310 °C | ||
| Processing (melt) temperature | 280 to 310 °C | ||
| Temperature | 75 to 105 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| screw speed | 20 to 100 rpm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 126 °C | |
| ASTM D648 | 117 °C | ||
| RTI Elec | UL 746 | 110 °C | |
| RTI Imp | UL 746 | 105 °C | |
| RTI | UL 746 | 110 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top