Material Properties:wear resistant｜enhance
Application Areas:Car hood｜Plastic bag｜Electrical appliances｜Lighting applications｜sporting goods
Color:--
Grade:Injection grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Linear coefficient of thermal expansion	流动 : -40 到 40°C	ASTM E831	3.8E-5 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	横向 : -40°C	ISO 11359-2	5.5E-5 cm/cm/°C

Impact resistance	Test Condition	Test Method	Test Result
Dart impact	23°C, Energy at Peak	ASTM D3763	10.0 J
Dart impact	Dart impact	--	ISO 6603-2	2.00 J

injection	Test Condition	Test Method	Test Result
drying temperature			80 °C
drying time			4.0 hr
Suggested maximum moisture content			0.15 to 0.25 %
Temperature at the rear of the barrel			265 to 275 °C
Temperature in the middle of the barrel			280 to 295 °C
Temperature at the front of the material cylinder			295 to 305 °C
Processing (melt) temperature			280 to 305 °C
mold temperature			95 to 110 °C
Back pressure			0.200 to 0.300 Mpa
screw speed			30 to 60 rpm

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	断裂	ASTM D638	139 Mpa
tensile strength	tensile strength	断裂	ISO 527-2	138 Mpa
elongation	断裂	ASTM D638	2.1 %
flexural modulus		ISO 178	9700 Mpa
bending strength	--	ASTM D790	236 Mpa
bending strength	bending strength	--	ISO 178	211 Mpa
coefficient of friction	Dynamic	ASTM D3702	0.58
Wear factor		ASTM D3702	2.4E+6 10^-8 mm³/N·m

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top