Material Properties:Chemical resistance｜High impact resistance｜High mobility｜UV resistance
Application Areas:medical care｜Plastic bag｜Gears｜Automotive Applications
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result
Shrinkage rate		Internal	0.5-0.7 %
Shrinkage rate	Shrinkage rate		Internal	0.6-0.8 %
specific volume		ASTM D792	0.82 cm³/g

Thermal Properties	Test Method	Test Result
RTI Imp	UL 746B	75 °C
RTI Elec	UL 746B	75 °C
RTI Imp	UL 746B	75 °C

combustibility	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	1.49 mm

Electrical Property	Test Condition	Test Method	Test Result
Compared to the Leakage Traceability Index (CTI)		UL 746A	PLC_2

Mechanical properties	Test Method	Test Result
tensile strength	ASTM D638	61 Mpa
elongation at break	ASTM D638	120 %
bending strength	ASTM D790	93 Mpa
Flexural modulus	ASTM D790	2340 Mpa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	106 J/m
Suspended wall beam without notch impact strength		ASTM D256	667 J/m

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top