PPO NORYL™ SE1X-111 SABIC INNOVATIVE US
203
- Unit Price:US$ 4,019 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:10MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:High temperature resistance｜Hydrolysis resistance
- Application Areas:Electronic and electrical components｜Mechanical component cover｜Household products
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Outdoor applicability | UL 746C | f1 | |
| Water absorption rate | ASTM D570 | 0.060 % | |
| Shrinkage rate | 内部方法 | 0.50 - 0.70 % | |
| 内部方法 | 0.50 - 0.70 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-1 | |
| UL 94 | V-0 | ||
| Radiation board grade | RP100 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dart impact | ASTM D3763 | 51.0 J | |
| ASTM D3763 | 32.0 J |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ASTM D790 | 102 Mpa | |
| Flexural modulus | ASTM D790 | 2500 Mpa | |
| elongation | ASTM D638 | 20 % | |
| ASTM D638 | 8.1 % | ||
| tensile strength | ASTM D638 | 53.0 Mpa | |
| ASTM D638 | 67.0 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dissipation Factor | ASTM D150 | 3.4E-3 | |
| ASTM D150 | 2.1E-3 | ||
| arc resistance | ASTM D495 | PLC 6 | |
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 1 | |
| High Voltage Arc Traceability Rate (HVTR) | UL 746 | PLC 4 | |
| Dissipation Factor | ASTM D150 | 3.4E-3 | |
| dielectric constant | ASTM D150 | 2.46 | |
| ASTM D150 | 2.52 | ||
| ASTM D150 | 2.52 | ||
| dielectric strength | ASTM D149 | 18 KV/mm | |
| Volume resistivity | ASTM D257 | 2.3E+16 ohms·cm | |
| Surface Resistivity | ASTM D257 | > 1.0E+15 ohms |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 105 to 110 °C | ||
| drying time | 3.0 to 4.0 hr | ||
| Suggested maximum moisture content | 0.020 % | ||
| Suggested injection volume | 30 to 70 % | ||
| Temperature at the rear of the barrel | 250 to 300 °C | ||
| Temperature in the middle of the barrel | 260 to 305 °C | ||
| Temperature at the front of the material cylinder | 270 to 310 °C | ||
| Spray nozzle temperature | 280 to 310 °C | ||
| Processing (melt) temperature | 280 to 310 °C | ||
| Temperature | 75 to 105 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| screw speed | 20 to 100 rpm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| RTI | UL 746 | 110 °C | |
| RTI Imp | UL 746 | 105 °C | |
| RTI Elec | UL 746 | 110 °C | |
| Heat distortion temperature | ASTM D648 | 117 °C | |
| ASTM D648 | 126 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top