Material Properties:Glass fiber reinforced｜Electrical performance
Application Areas:Non specific food｜Lawn equipment｜Garden equipment｜Industrial applications｜Automotive External Parts｜Electrical field｜Electronic field｜Architectural application field｜Outdoor applications｜Electrical appliances｜Engine hood parts｜Medical supplies｜Nursing supplies｜Plastic bag｜Automotive interior parts｜Casters｜Aerospace Applications
Color:--
Grade:Injection grade

Material Certification

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23℃	ASTM D256	53	J/m
Suspended wall beam without notch impact strength	/，23℃	ASTM D4812	534	J/m
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Type I, 5，Break	ASTM D638	93	Mpa
Elongation at Break	Type I, 5	ASTM D638	5	%
bending strength	1.3 mm，Break	ASTM D790	144	Mpa
Bending modulus	1.3 mm	ASTM D790	4820	Mpa
thermal properties	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	-40°C to，Flow	ASTM E831	21.6	E-6/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	60°C to，Flow	ASTM E831	21.6	E-6/°C
combustion performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	10°C/min，HB	UL 94	0.71	mm
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	xflow, 1.5Across Flow	Internal	0.5-0.8
	Shrinkage rate	xflow, 3.2，Across Flow	Internal	0.8-1.1
		Shrinkage rate	flow, 1.5	Internal	0.4-0.6
		Shrinkage rate	Shrinkage rate	flow, 3.2	Internal	0.6-0.9
Water absorption rate	24 hours	ASTM D570	0.07
Bi Rong		ASTM D792	0.71	cm³/g
hardness	Test Condition	Test Method	Test Result	Test Unit
Hardness (Rockwell R)		ASTM D785	118	R

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top