Material Properties:wear resistant
Application Areas:Household appliances｜Household appliances｜Electrical field｜Electronic field｜Fitness equipment｜Automotive sector｜Bottle cap｜Electrical components｜Application in the automotive field｜Electronic data processing
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Method	Test Result
density	ASTM D792	1.41 g/cm³
melt mass-flow rate	ASTM D1238	9.0 g/10min
Shrinkage rate	ASTM D955	2.0 %
Water absorption rate	ASTM D570	0.22 %

hardness	Test Condition	Test Method	Test Result
Rockwell hardness		ASTM D785	80

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating		UL 94	HB

Mechanical properties	Test Method	Test Result
tensile strength	ASTM D638	61.0 Mpa
elongation	ASTM D638	60 %
Flexural modulus	ASTM D790	2600 Mpa
bending strength	ASTM D790	90.0 Mpa
shear strength	ASTM D732	55.0 Mpa

Impact resistance	Test Condition	Test Method	Test Result
Impact strength of cantilever beam gap		ASTM D256	64 J/m

Electrical performance	Test Method	Test Result
Surface Resistivity	ASTM D257	1E+16 ohms
Volume resistivity	ASTM D257	1E+14 ohms·cm
dielectric strength	ASTM D149	19 KV/mm
dielectric constant	ASTM D150	3.70
Dissipation Factor	ASTM D150	7E-03

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	165 °C
Linear coefficient of thermal expansion		ASTM D696	1.3E-04 cm/cm/°C
Heat distortion temperature		ASTM D648	158 °C
Heat distortion temperature	Heat distortion temperature		ASTM D648	110 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top