Filling analysis	Test Condition	Test Method	Test Result	Test Unit
Melt viscosity	260°C,1500sec^-1	ISO 11443	110	Pa·s
impact performance	Test Condition	Test Method	Test Result	Test Unit
23°C		ISO 180/1A	9.0	kJ/m²
-30°C		ASTM D4812	500	J/m
23°C		ASTM D4812	500	J/m
-30°C		ISO 180/1U	37	kJ/m²
23°C		ISO 180/1U	37	kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/2U	35	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/2U	40	kJ/m²
-30°C		ASTM D256	75	J/m
0°C		ASTM D256	75	J/m
23°C		ASTM D256	75	J/m
-30°C		ISO 180/1A	9.0	kJ/m²
0°C		ISO 180/1A	9.0	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.800mm	UL 94	V-0
UL flame retardant rating	UL flame retardant rating	3.00mm	UL 94	5VB
Burning wire flammability index	2.00mm	IEC 60695-2-12	960	°C
Hot filament ignition temperature	1.00mm	IEC 60695-2-13	750	°C
	Hot filament ignition temperature	2.00mm	IEC 60695-2-13	750	°C
	Hot filament ignition temperature	Hot filament ignition temperature	3.00mm	IEC 60695-2-13	800	°C
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
--1		ASTM D638	11000	Mpa
yield		ASTM D638	110	Mpa
yield	yield		ISO 527-2/5	105	Mpa
crack		ASTM D638	110	Mpa
Fracture bending strain		ISO 178	2.0	%
crack		ISO 527-2/5	105	Mpa
yield		ASTM D638	2.0	%
yield	yield		ISO 527-2/5	2.0	%
crack		ASTM D638	2.0	%
crack	crack		ISO 527-2/5	2.0	%
50.0mm span		ASTM D790	9000	Mpa
--7		ISO 178	10000	Mpa
--8		ISO 178	170	Mpa
Yield, 50.0mm span		ASTM D790	150	Mpa
Fracture, 50.0mm span		ASTM D790	150	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
RTI Imp		UL 746	125	°C
RTI		UL 746	140	°C
0.45MPa, unannealed, 3.20mm		ASTM D648	223	°C
0.45MPa, unannealed, 64.0mm span		ISO 75-2/Bf	225224	°C
1.8MPa, unannealed, 3.20mm		ASTM D648	210	°C
1.8MPa, unannealed, 64.0mm span of		ISO 75-2/Af	210	°C
Ball Pressure Test	125°C	IEC 60695-10-2	Pass
Linear coefficient of thermal expansion	MD:-40to40°C	ISO 11359-2	2E-05	cm/cm/°C
	Linear coefficient of thermal expansion	MD:23to150°C	ISO 11359-2	2.5E-05	cm/cm/°C
		Linear coefficient of thermal expansion	TD:-40to40°C	ISO 11359-2	6.2E-05	cm/cm/°C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD:23to150°C	ISO 11359-2	1.5E-04	cm/cm/°C
RTI Elec		UL 746	140	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	265°C/5.0kg	ASTM D1238	23	g/10min
Melt Volume Flow Rate (MVR)	250°C/5.0kg	ISO 1133	16.0	cm3/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	1MHz	ASTMD150	3.80
Dissipation factor	1MHz	ASTMD150	0.14
Compared to the anti leakage trace index	CTI	UL 746	PLC 0
Compared to the anti leakage trace index	Compared to the anti leakage trace index		IEC 60112		V
High arc combustion index	HAI	UL 746	PLC 0
Hot wire ignition	HWI	UL 746	PLC 0
Surface resistivity		IEC 60093	>1.0E+15	ohms
Volume resistivity		ASTMD257	1E+14	ohms·cm
0.800mm,inOil		ASTM D149	32	KV/mm
1.60mm,inOil		ASTM D149	22	KV/mm
3.20mm, inoil		ASTM D149	18	KV/mm
0.800mm, in oil		IEC 60243-1	32	KV/mm
1.60mm, in oil		IEC 60243-1	22	KV/mm
3.20mm, in oil		IEC 60243-1	18	KV/mm
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Sale	ISO 2039-2	120
Ball Pressure Test	H358/30	ISO 2039-1	142	Mpa
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Filling material		ASTM D229	30	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top