PC LEXAN™ EXL9330-WH9G022 SABIC INNOVATIVE US
409
- Unit Price:US$ 5,100 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:100MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Transaction Guarantee:
Supplier Information
Dongguan Shengtai New Material Technology Co., Ltd.
+86 1598********View
3292********View
For more details, please contact the supplier!
Material Description
- Material Properties:Flame retardant｜Toughening｜UV resistance
- Application Areas:food｜Thin walled products｜Casters
- Color:--
- Grade:--
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 10 g/10 min | |
| Melt volume flow rate | ISO 1133 | 9.00 cm3/10min | |
| Shrinkage rate | 内部方法 | 0.40 - 0.80 % | |
| 内部方法 | 0.40 - 0.80 % | ||
| Water absorption rate | ISO 62 | 0.35 % | |
| ISO 62 | 0.15 % | ||
| Outdoor applicability | UL 746C | f1 | |
| density | ASTM D792 | 1.18 g/cm³ | |
| ISO 1183 | 1.19 g/cm³ | ||
| Outdoor applicability | UL 746C | f1 |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | 90.0 Mpa |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 | |
| UL 94 | 5VA | ||
| Burning wire flammability index | IEC 60695-2-12 | 960 °C | |
| Hot filament ignition temperature | IEC 60695-2-13 | 825 °C | |
| Limiting Oxygen Index | ISO 4589-2 | 35 % | |
| ISO 4589-2 | 35 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 2100 Mpa | |
| ISO 527-2/1 | 2100 Mpa | ||
| tensile strength | ASTM D638 | 58.0 Mpa | |
| ISO 527-2/50 | 55.0 Mpa | ||
| ASTM D638 | 61.0 Mpa | ||
| ISO 527-2/50 | 60.0 Mpa | ||
| elongation | ASTM D638 | 6.0 % | |
| ISO 527-2/50 | 6.0 % | ||
| ASTM D638 | 130 % | ||
| ISO 527-2/50 | 130 % | ||
| Flexural modulus | ASTM D790 | 2060 Mpa | |
| ISO 178 | 2200 Mpa | ||
| bending strength | ISO 178 | 85.0 Mpa | |
| ASTM D790 | 88.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 60 kJ/m² | |
| ISO 179/1eA | 75 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| ISO 179/1eU | 无断裂 | ||
| Suspended wall beam without notch impact strength | ISO 180/1U | 无断裂 | |
| ISO 180/1U | 无断裂 | ||
| Dart impact | ASTM D3763 | 52.0 J |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | > 1.0E+15 ohms | |
| Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm | |
| dielectric strength | ASTM D149 | 17 KV/mm | |
| IEC 60243-1 | 16 KV/mm | ||
| dielectric constant | ASTM D150 | 2.95 | |
| ASTM D150 | 2.95 | ||
| ASTM D150 | 2.90 | ||
| IEC 60250 | 2.60 | ||
| IEC 60250 | 2.60 | ||
| IEC 60250 | 2.70 | ||
| Dissipation Factor | ASTM D150 | 2.4E-3 | |
| ASTM D150 | 2.4E-3 | ||
| ASTM D150 | 8.5E-3 | ||
| IEC 60250 | 1.0E-3 | ||
| IEC 60250 | 1.0E-3 | ||
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 3 | |
| IEC 60112 | PLC 3 | ||
| High arc combustion index (HAI) | UL 746 | PLC 0 | |
| Hot wire ignition (HWI) | UL 746 | PLC 1 | |
| Surface Resistivity | IEC 60093 | > 1.0E+15 ohms | |
| Volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm | |
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 3 | |
| IEC 60112 | PLC 3 | ||
| High arc combustion index (HAI) | UL 746 | PLC 0 | |
| Hot wire ignition (HWI) | UL 746 | PLC 1 |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 120 °C | ||
| drying time | 3.0 to 4.0 hr | ||
| Suggested maximum moisture content | 0.020 % | ||
| Suggested injection volume | 40 to 60 % | ||
| Temperature at the rear of the barrel | 215 to 295 °C | ||
| Temperature in the middle of the barrel | 280 to 305 °C | ||
| Temperature at the front of the material cylinder | 295 to 315 °C | ||
| Spray nozzle temperature | 290 to 310 °C | ||
| Processing (melt) temperature | 295 to 315 °C | ||
| Temperature | 70 to 95 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| screw speed | 40 to 70 rpm | ||
| Exhaust hole depth | 0.025 to 0.076 mm | ||
| drying temperature | 120 °C | ||
| drying time | 3.0 to 4.0 hr | ||
| Suggested maximum moisture content | 0.020 % | ||
| Suggested injection volume | 40 to 60 % | ||
| Temperature at the rear of the barrel | 215 to 295 °C | ||
| Temperature in the middle of the barrel | 280 to 305 °C | ||
| Temperature at the front of the material cylinder | 295 to 315 °C | ||
| Spray nozzle temperature | 290 to 310 °C | ||
| Processing (melt) temperature | 295 to 315 °C | ||
| Temperature | 70 to 95 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| screw speed | 40 to 70 rpm | ||
| Exhaust hole depth | 0.025 to 0.076 mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 134 °C | |
| ISO 75-2/Be | 135 °C | ||
| ASTM D648 | 120 °C | ||
| ASTM D648 | 124 °C | ||
| ISO 75-2/Ae | 124 °C | ||
| vicat | ASTM D152512 | 142 °C | |
| ISO 306/B50 | 140 °C | ||
| ball-indentation hardness | IEC 60695-10-2 | 通过 | |
| Linear coefficient of thermal expansion | ASTM E831 | 6.7E-5 cm/cm/°C | |
| ISO 11359-2 | 7.2E-5 cm/cm/°C | ||
| ASTM E831 | 6.7E-5 cm/cm/°C | ||
| ISO 11359-2 | 7.7E-5 cm/cm/°C | ||
| RTI Elec | UL 746 | 125 °C | |
| RTI Imp | UL 746 | 115 °C | |
| RTI | UL 746 | 125 °C | |
| RTI Elec | UL 746 | 125 °C | |
| RTI Imp | UL 746 | 115 °C | |
| RTI | UL 746 | 125 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Other Prices
| Supplier | Unit Price |
|---|---|
| ASIAPLAS | US$ 4456 /MT |
Contact Us
Get App
Top