plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us
Home
Plastic Raw Materials
PEI

PEI ULTEM™  1000-7101 SABIC INNOVATIVE SHANGHAI

330
  • Unit Price:US$ 24,098 /MT
  • Packaging Specification:
    25 KG/PKG
  • Packaging Material:
    Paper bag
  • Supply Quantity:
    25MT
  • Delivery Terms:
    FOB
  • Port of Loading :
    China Main Port
  • Accepted Payment Methods:
    T/T
  • Shipping:
    Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View
serv********View
+86 ********View

For more details, please contact the supplier!

Material Description

  • Material Properties:Glass fiber reinforced｜Flame retardant｜enhance
  • Application Areas:Automotive sector｜Electrical field｜Electronic field
  • Color:--
  • Grade:Injection grade

Technical Data Sheet

impact performanceTest ConditionTest MethodTest Result
Suspended wall beam without notch impact strength23°CASTM D48121300 J/m
Dart impact23°CASTM D302936.0 J
Reverse notch impact3.20 mmASTM D2561300 J/m
flammabilityTest ConditionTest MethodTest Result
UL flame retardant rating0.40 mmUL 94V-2
UL flame retardant rating0.75 mmUL 94V-0
UL flame retardant rating3.0 mmUL 945VA
Extreme Oxygen IndexASTM D286347 %
mechanical propertiesTest ConditionTest MethodTest Result
Taber abraser1000 Cycles, 1000 g, CS-17 WheelASTM D104410.0 mg
Poisson's ratioASTM E1320.36
bending strengthYield, 100 mm SpanASTM D790165 Mpa
Bending modulus100 mm SpanASTM D7903510 Mpa
elongationBreakASTM D63860 %
elongationYieldASTM D6387.0 %
tensile strengthYieldASTM D638110 Mpa
Tensile modulusASTM D6383580 Mpa
injectionTest ConditionTest MethodTest Result
Processing (melt) temperature350 to 400 °C
Temperature at the rear of the barrel330 to 400 °C
Temperature in the middle of the barrel340 to 400 °C
Temperature at the front of the material cylinder345 to 400 °C
Spray nozzle temperature345 to 400 °C
drying temperature150 °C
drying time4.0 to 6.0 hr
Suggested maximum moisture content0.020 %
Suggested injection volume40 to 60 %
Mold temperature135 to 165 °C
Back pressure0.300 to 0.700 Mpa
Screw speed40 to 70 rpm
Exhaust hole depth0.025 to 0.076 mm
thermal performanceTest ConditionTest MethodTest Result
RTIUL 746170 °C
RTI ImpUL 746170 °C
RTI ElecUL 746170 °C
Linear coefficient of thermal expansionFlow : -20 to 150°CASTM E8315.6E-5 cm/cm/°C
Vicat softening temperatureASTM D15254218 °C
Hot deformation temperature1.8 MPa, Unannealed, 6.40 mmASTM D648201 °C
Hot deformation temperature0.45 MPa, Unannealed, 6.40 mmASTM D648210 °C
thermal conductivityASTM C1770.22 W/m/K
Linear coefficient of thermal expansionAcross Flow : -20 to 150°CASTM E8315.4E-5 cm/cm/°C
Physical propertiesTest ConditionTest MethodTest Result
Water absorption rateEquilibrium, 23°CASTM D5701.3 %
Water absorption rate24 hrASTM D5700.25 %
Shrinkage rate3.20 mm，FlowInternal Method0.50 - 0.70 %
melt mass-flow rate337°C/6.6 kgASTM D12389.0 g/10 min
Electrical performanceTest ConditionTest MethodTest Result
Volume resistivityASTM D2571.0E+17 ohms·cm
Dielectric strength1.60 mm, in AirASTM D14933 KV/mm
Dielectric strength1.60 mm, in OilASTM D14928 KV/mm
Dielectric strength3.20 mm, in OilASTM D14920 KV/mm
Dielectric constant100 HzASTM D1503.15
Dielectric constant1 kHzASTM D1503.15
Dissipation factor100 HzASTM D1501.5E-3
Dissipation factor1 kHzASTM D1501.2E-3
Dissipation factor2.45 GHzASTM D1502.5E-3
Arc resistanceASTM D495PLC 5
Compared to the anti leakage trace indexUL 746PLC 4
High arc combustion indexUL 746PLC 3
High voltage arc tracing rateUL 746PLC 2
Hot wire ignitionUL 746PLC 1
hardnessTest ConditionTest MethodTest Result
Rockwell hardnessM-ScaleASTM D785109
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top