Material Properties:Low temperature resistance｜wear resistant｜Hydrolysis resistance
Application Areas:Fitness equipment｜Electric wire｜Cable｜Automotive sector
Color:--
Grade:Injection grade

Technical Data Sheet

other	Test Condition	Test Method	Test Result	Test Unit
characteristic			优异机械性能、良好弹性回复力、耐磨、低温柔软性及防潮耐水解性.适用于射出、押出
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		DIN 53479	1.19	g/cm³
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	300%	DIN 53504-S2	8.5	n/mm²
Permanent compression deformation	70°C	DIN 53517	35	%
Impact strength of cantilever beam gap	－30°C	DIN 53453	不破裂	kJ/m²
Shore hardness		DIN 53505	82	shoreA
Elongation at Break		DIN 53504-S2	650	%
tear strength		DIN 53515	65	N/mm
Permanent compression deformation	室温	DIN 53517	25	%
Impact strength of cantilever beam gap	＋23°C	DIN 53453	不破裂	kJ/m²
Tensile modulus	100%	DIN 53504-S2	4.5	n/mm²
Elongation at Break	80℃水中21天	DIN 53504-S2	650	%
tensile strength		DIN 53504-S2	50	n/mm²
Tensile modulus	20%	DIN 53504-S2	2.5	n/mm²
Friction loss		DIN 53516	30	mm³
tensile strength	80℃水中21天	DIN 53504-S2	35	n/mm²
Tensile modulus	100%	ASTM D412/ISO 527	4.5	Mpa/Psi
Tensile modulus	Tensile modulus	300%	ASTM D412/ISO 527	8.5	Mpa/Psi
tensile strength		ASTM D412/ISO 527	50	Mpa/Psi
tear strength		ASTM D624/ISO 34	65	n/mm²
Shore hardness		ASTM D2240/ISO 868	82	Shore A

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top