Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		DIN 53479	1.19	g/cm³
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		DIN 53504-S2	50	n/mm²
Elongation at Break	80℃水中21天	DIN 53504-S2	650	%
Elongation at Break	Elongation at Break		DIN 53504-S2	650	%
Friction loss		DIN 53516	30	mm³
tear strength		DIN 53515	70	N/mm
Permanent compression deformation	室温	DIN 53517	25	%
Impact strength of cantilever beam gap	－30°C	DIN 53453	不破裂	kJ/m²
Shore hardness		DIN 53505	36	shoreB
Permanent compression deformation	70°C	DIN 53517	35	%
Shore hardness		DIN 53505	87	shoreA
Tensile modulus	20%	DIN 53504-S2	3	n/mm²
	Tensile modulus	100%	DIN 53504-S2	5.5	n/mm²
	Tensile modulus	Tensile modulus	300%	DIN 53504-S2	9.5	n/mm²
tensile strength	80℃水中21天	DIN 53504-S2	38	n/mm²
Impact strength of cantilever beam gap	＋23°C	DIN 53453	不破裂	kJ/m²

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top