POM Delrin® 100P NC010 DUPONT USA
376
- Unit Price:US$ 5,635 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:326MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
- Material Comparison:POM Delrin® 100P NC010 DUPONT SHENZHEN
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:High toughness
- Application Areas:Automotive sector｜Engine parts｜Cam
- Color:--
- Grade:Injection grade
Material Certification
Technical Data Sheet
Compare
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | M计秤 | ISO 2039-2 | 88 |
| R计秤 | ISO 2039-2 | 119 |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 178 °C | |
| Linear coefficient of thermal expansion | MD：-- | ISO 11359-2 | 1.1E-04 cm/cm/°C |
| MD：-40to23°C | ISO 11359-2 | 1E-04 cm/cm/°C | |
| TD：-- | ISO 11359-2 | 1.1E-04 cm/cm/°C | |
| TD：-40to23°C | ISO 11359-2 | 1E-04 cm/cm/°C | |
| TD：AnnealingTemperature | ISO 11359-2 | 160 °C | |
| TD：AnnealingTime-Optional | ISO 11359-2 | 30.0 min/mm | |
| Heat Deflection Temperature | 0.45MPa,未退火 | ISO 75-2/B | 155 °C |
| 1.8MPa,未退火 | ISO 75-2/A | 95.0 °C | |
| vicat | -- | ISO 306/A50 | 175 °C |
| -- | ISO 306/B50 | 160 °C |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| burning rate | 1.00mm | ISO 3795 | 50 mm/min |
| UL flame retardant rating | 0.8mm | UL 94 | HB |
| 1.5mm | UL 94 | HB | |
| 0.8mm | IEC 60695-11-10,-20 | HB | |
| 1.5mm | IEC 60695-11-10,-20 | HB | |
| FMVSS flammability | FMVSS302 | B | |
| atomization | refraction，F值 | ISO 6452 | 91 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Emission | VDA275 | <8.00 mg/kg | |
| Emissions of Organic Compounds | VDA277 | 4.70 µgC/g |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 400 kJ/m² |
| 23°C | ISO 179/1eU | NoBreak | |
| Impact strength of cantilever beam gap | -40°C | ISO 180/1A | 12 kJ/m² |
| 23°C | ISO 180/1A | 14 kJ/m² | |
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 14 kJ/m² |
| 23°C | ISO 179/1eA | 15 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 2E+13 ohms | |
| volume resistivity | IEC 60093 | 1E+14 ohms·cm | |
| dielectric strength | IEC 60243-1 | 41 KV/mm | |
| relative permittivity | 100Hz | IEC 60250 | 3.90 |
| 1MHz | IEC 60250 | 3.90 | |
| Dissipation Factor | 100Hz | IEC 60250 | 3.5E-03 |
| 1MHz | IEC 60250 | 5.5E-03 | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.42 g/cm³ | |
| melt mass-flow rate | ISO 1133 | 2.6 g/10min | |
| Melt volume flow rate | 190°C/2.16kg | ISO 1133 | 2.20 cm3/10min |
| shrinkage rate | TD | ISO 294-4 | 1.9 % |
| MD | ISO 294-4 | 2.2 % | |
| Water absorption rate | 饱和,23°C,2.00mm | ISO 62 | 1.4 % |
| 平衡,23°C,2.00mm,50%RH | ISO 62 | 0.30 % | |
| MediumDensity | 1.19 g/cm³ | ||
| SpecificHeatCapacity of Melt | 3000 J/kg/°C | ||
| ThermalConductivityofMelt | 0.22 W/m/K |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 2950 Mpa | |
| tensile strength | 屈服 | ISO 527-2 | 71.0 Mpa |
| Tensile strain | 屈服 | ISO 527-2 | 25 % |
| Nominal tensile fracture strain | ISO 527-2 | 45 % | |
| Tensile creep modulus | 1hr | ISO 899-1 | 2700 Mpa |
| 1000hr | ISO 899-1 | 1500 Mpa | |
| flexural modulus | ISO 178 | 2850 Mpa | |
| bending strength | 3.5%应变 | ISO 178 | 77.0 Mpa |
| Poisson's ratio | ISO 527 | 0.35 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top