Material Properties:Chemical resistance｜Anti creep｜High mobility｜Good forming performance｜Thermal stability｜wear resistant｜Medium viscosity｜high strength
Application Areas:Automotive sector｜Electrical field｜Electronic field｜Industrial applications｜Industrial machinery｜machine｜Mechanical components
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Method	Test Result
melt mass-flow rate	ISO 1133	13 g/10min
Shrinkage rate	内部方法	2.0 %
Water absorption rate	ISO 62	0.20 %
density	ISO 1183	1.41 g/cm³

Mechanical properties	Test Method	Test Result
tensile strength	ISO 527-2/50	64.0 Mpa
Tensile strain	ISO 527-2	9.0 %
Nominal tensile fracture strain	ISO 527-2	27 %
Flexural modulus	ISO 178	2600 Mpa
bending strength	ISO 178	90.0 Mpa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179	6.0 kJ/m²

Electrical performance	Test Method	Test Result
Surface Resistivity	IEC 60093	1E+16 ohms
Volume resistivity	IEC 60093	1E+16 ohms·cm
dielectric strength	IEC 60243-1	19 KV/mm

Thermal performance	Test Method	Test Result
Heat distortion temperature	ISO 75-2/A	100 °C
melting temperature	ISO 11357-3	168 °C
Linear coefficient of thermal expansion	ISO 11359-2	1.2E-04 cm/cm/°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top