PC LEXAN™ LUX2614 WH5E140X SABIC INNOVATIVE NANSHA

278

Unit Price:US$ 4,580 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading :
Guangzhou port, China
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

+86 ********View

For more details, please contact the supplier!

Material Description

Material Properties:Flame retardant｜UV resistance
Application Areas:Flame retardant｜UV resistance
Color:--
Grade:Light diffusion level

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
Refractive index		ASTM D542	1.586
impact performance	Test Condition	Test Method	Test Result	Test Unit
Dart impact	23°C	ASTM D3029	169	J
Impact strength of cantilever beam gap		ASTM D1822	546	kJ/m²
Suspended wall beam without notch impact strength	23°C	ASTM D4812	3200	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
Hot filament ignition temperature	0.75 mm9	IEC 60695-2-13	875	°C
UL flame retardant rating	0.817mm	UL 94	V-2
Burning wire flammability index	0.75 mm	IEC 60695-2-12	750	°C
Burning wire flammability index	Burning wire flammability index	1.5 mm	IEC 60695-2-12	850	°C
Hot filament ignition temperature	1.5 mm	IEC 60695-2-13	850	°C
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Taber abraser	1000 Cycles, 1000 g, CS-17 Wheel	ASTM D1044	10.0	mg
bending strength	Yield, 50.0 mm Span3	ASTM D790	93.0	Mpa
bending strength	bending strength	--4,5	ISO 178	94.0	Mpa
Bending modulus	--4	ISO 178	2300	Mpa
Bending modulus	Bending modulus	50.0 mm Span3	ASTM D790	2340	Mpa
elongation	Break2	ASTM D638	110	%
elongation	elongation	Yield	ISO 527-2/50	6.0	%
tensile strength	Yield	ISO 527-2/50	63.0	Mpa
tensile strength	tensile strength	Yield2	ASTM D638	62.0	Mpa
Tensile modulus		ISO 527-2/1	2300	Mpa
elongation	Yield2	ASTM D638	7.0	%
tensile strength	Break	ISO 527-2/50	63.0	Mpa
tensile strength	tensile strength	Break2	ASTM D638	65.0	Mpa
injection	Test Condition	Test Method	Test Result	Test Unit
drying temperature			120	°C
drying time			3.0 to 4.0	hr
Suggested maximum moisture content			0.020	%
Suggested injection volume			40 to 60	%
Temperature at the rear of the barrel			290 to 310	°C
Temperature in the middle of the barrel			300 to 320	°C
Temperature at the front of the material cylinder			310 to 330	°C
Spray nozzle temperature			305 to 325	°C
Processing (melt) temperature			310 to 330	°C
Mold temperature			80 to 115	°C
Back pressure			0.300 to 0.700	Mpa
Screw speed			40 to 70	rpm
Exhaust hole depth			0.025 to 0.076	mm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45 MPa, Unannealed, 6.40 mm	ASTM D648	137	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed, 6.40 mm	ASTM D648	132	°C
Vicat softening temperature	--	ASTM D15257	154	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	145	°C
Ball Pressure Test	123 to 127°C	IEC 60695-10-2	通过
Linear coefficient of thermal expansion	-40 to 95°C，Flow	ASTM E831	6.8E-5	cm/cm/°C
specific heat		ASTM C351	1260	J/kg/°C
thermal conductivity		ASTM C177	0.29	W/m/K
RTI Elec		UL 746	80.0	°C
RTI Imp		UL 746	80.0	°C
RTI		UL 746	80.0	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Outdoor applicability		UL 746C	f2
Water absorption rate	Equilibrium, 100°C	ASTM D570	0.58	%
	Water absorption rate	Equilibrium, 23°C	ASTM D570	0.35	%
	Water absorption rate	Water absorption rate	24 hr	ASTM D570	0.15	%
Shrinkage rate	3.20 mm，Flow	Internal Method	0.50 - 0.70	%
Melt Volume Flow Rate (MVR)	300°C/1.2 kg	ISO 1133	7.00	cm3/10min
melt mass-flow rate	300°C/1.2 kg	ASTM D1238	7.0	g/10 min
Specific volume		ASTM D792	0.830	cm³/g
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	> 1.0E+17	ohms·cm
Dielectric strength	3.20 mm, in Air	ASTM D149	15	KV/mm
Dielectric constant	60 Hz	ASTM D150	3.17
	Dielectric constant	50 kHz	ASTM D150	3.17
	Dielectric constant	Dielectric constant	1 MHz	ASTM D150	2.96
Dissipation factor	50 Hz	ASTM D150	9.0E-4
	Dissipation factor	60 Hz	ASTM D150	9.0E-4
	Dissipation factor	Dissipation factor	1 MHz	ASTM D150	0.010
Compared to the anti leakage trace index		UL 746	PLC 3
High arc combustion index		UL 746	PLC 1
Hot wire ignition		UL 746	PLC 3
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	118
Rockwell hardness	Rockwell hardness	M-Scale	ASTM D785	70

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Supplier Join

Get App

Top

PC LEXAN™ LUX2614 WH5E140X SABIC INNOVATIVE NANSHA

Material Description

Technical Data Sheet

Sourcing & Prices

Selling & Verification

Explore Materials

Price Index