PC/ABS CYCOLOY™ LG9000-701 SABIC INNOVATIVE NANSHA
221
- Unit Price:US$ 4,306 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:114.8MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:UV resistance
- Application Areas:Automotive Applications
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R 级 | ASTM D785 | 118 |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat Deflection Temperature | 0.45 MPa, 未退火, 3.20 mm | ASTM D648 | 123 °C |
| 0.45 MPa, 未退火, 6.40 mm | ASTM D648 | 129 °C | |
| 1.8 MPa, 未退火, 3.20 mm | ASTM D648 | 107 °C | |
| 1.8 MPa, 未退火, 6.40 mm | ASTM D648 | 110 °C | |
| vicat | ASTM D15254 | 129 °C | |
| Linear coefficient of thermal expansion | 流动 : -20 到 150°C | ASTM E831 | 7.2E-5 cm/cm/°C |
| 横向 : -20 到 150°C | ASTM E831 | 7.2E-5 cm/cm/°C | |
| thermal conductivity | ASTM C177 | 0.20 W/m/K | |
| RTI Elec | UL 746 | 60.0 °C | |
| RTI Imp | UL 746 | 60.0 °C | |
| RTI | UL 746 | 60.0 °C |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| gloss | 60°, 无织构 | ASTM D523 | 30 |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | 1.5 mm | UL 94 | HB |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dart impact | -30°C, Total Energy | ASTM D3763 | 33.0 J |
| 23°C, Total Energy | ASTM D3763 | 40.0 J |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | 260°C/5.0 kg | ASTM D1238 | 17 g/10 min |
| shrinkage rate | 流动 : 3.20 mm | 内部方法 | 0.50 - 0.70 % |
| 横向流动 : 3.20 mm | 内部方法 | 0.50 - 0.70 % | |
| Water absorption rate | 24 hr | ASTM D570 | 0.10 % |
| 平衡, 23°C | ASTM D570 | 0.40 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| arc resistance | ASTM D495 | PLC 6 | |
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 2 | |
| High arc combustion index (HAI) | UL 746 | PLC 0 | |
| Hot wire ignition (HWI) | UL 746 | PLC 2 |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| drying temperature | 105 to 110 °C | ||
| drying time | 3.0 to 4.0 hr | ||
| Suggested maximum moisture content | 0.040 % | ||
| Suggested injection volume | 30 to 80 % | ||
| Temperature at the rear of the barrel | 250 to 290 °C | ||
| Temperature in the middle of the barrel | 255 to 295 °C | ||
| Temperature at the front of the material cylinder | 260 to 300 °C | ||
| Spray nozzle temperature | 275 to 300 °C | ||
| Processing (melt) temperature | 275 to 300 °C | ||
| mold temperature | 60 to 90 °C | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| screw speed | 40 to 70 rpm | ||
| Exhaust hole depth | 0.038 to 0.076 mm |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | 屈服 | ASTM D638 | 54.0 Mpa |
| elongation | 断裂 | ASTM D638 | 75 % |
| flexural modulus | 50.0 mm 跨距 | ASTM D790 | 2300 Mpa |
| bending strength | 屈服, 50.0 mm 跨距 | ASTM D790 | 84.0 Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top