Material Properties:High impact resistance｜ Extra high impact strength
Application Areas:chip｜Food service sector｜Equivalent to PC｜The application of transparent ABS and PC under non high-temperature conditions that can be replaced｜Equivalent to PC｜Can replace transparent ABS and PC in applications under non high temperature conditions.
Color:--
Grade:Injection grade

Material Certification

Technical Data Sheet Compare

physical property	Test Method	Test Result
Haze ratio	ASTM D-1003	0.4 %
Shrinkage rate	ASTM D-955	0.002-0.005 in/in
transmittance	ASTM D-1003	89 %
density	ASTM D-792	1.23 g/cm³

Basic performance	Test Condition	Test Method	Test Result
melt mass-flow rate			23 g/10min

Mechanical properties	Test Method	Test Result
Tensile stress	ASTM D-638	6500/7600 psi
Impact strength of cantilever beam gap	ASTM D-256	NB/1.2 ft-lb/in
elongation at break	ASTM D-638	5/330 %
Flexural modulus	ASTM D-790	2.6×105 psi
Rockwell hardness	ASTM D-785	105 R
tensile strength	ASTM D-790	9600 psi

Other performance	Test Condition	Test Method	Test Result
intrinsic viscosity			0.73

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D-648	74 °C
Heat distortion temperature	Heat distortion temperature		ASTM D-648	65 °C
vicat		ASTM D-1525	88 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top