Material Properties:High mobility｜Fast forming cycle｜Foamable｜Low mold expansion
Application Areas:Insulation material｜Cable sheath｜Foam
Color:--
Grade:Withdrawal level

Technical Data Sheet Compare

processability	Test Condition	Test Method	Test Result
Melt Temperature			220-250 °C

Basic performance	Test Condition	Test Method	Test Result
density		ISO 1183	0.945 g/m
melt mass-flow rate	190℃/2.16kg	ISO 1133	0.7 g/10min

Other performance	Test Condition	Test Method	Test Result
Oxidation induction time (OIT)	200℃	IEC 60811-4-2/B	0.83 hr

Electrical performance	Test Condition	Test Method	Test Result
Dissipation Factor		IEC 60250	0.00006
dielectric strength		IEC 60243-1	22 KV/mm
volume resistivity		IEC 60093	1E+15 ohm·cm
dielectric constant	1E+6Hz	IEC 60250	2.330

mechanical properties	Test Condition	Test Method	Test Result
Environmental stress cracking resistance	50℃，10% Igepal，F20	IEC 60811-4-1/B	> 48 hr
Tensile stress		ISO 527-2	23 Mpa
Tensile strain	断裂	ISO 527-2	600 %
Shore hardness	Shore D，1 sec	ASTM D-2240	61

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top