Material Properties:dimensional stability ｜Low warpage｜copolymer｜Filler: Glass beads｜30% filler by weight
Application Areas:currency
Color:--
Grade:Injection grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	1.8MPa,未退火	ASTM D648	138 °C
melting temperature		ASTM D3418	165 °C

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	0.800mm	UL 94	HB

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179/1eA	2.5 kJ/m²
Impact strength of cantilever beam gap	3.20mm	ASTM D256	37 J/m

Electrical performance	Test Method	Test Result
volume resistivity	ASTMD257	1E+14 ohms·cm
dielectric strength	IEC 60243-1	20 KV/mm
Surface Resistivity	ASTMD257	1E+16 ohms

Physical properties	Test Condition	Test Method	Test Result
190°C/2.16kg		ASTM D1238	18 g/10min
	2.00mm	ASTM D955	1.5 %
		流动方向	ASTM D955	1.5 %
Water absorption rate	平衡,23°C,60%RH	ASTM D570	0.20 %

mechanical properties	Test Condition	Test Method	Test Result
elongation	断裂,23°C	ASTMD638	4.0 %
23°C		ASTM D790	4040 Mpa
	23°C		ISO 178	4050 Mpa
	23°C	23°C		ISO 178	97.0 Mpa
Surrender, 23 ° C		ASTM D790	96.0 Mpa
Surrender, 23 ° C	Surrender, 23 ° C		ASTM D638	57.0 Mpa
Fracture, 23 ° C		ISO 527-2	58.0 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top