PC PANLITE® LV-2225Y TEIJIN JAPAN
203
- Unit Price:US$ 3,805 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:45.5MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:transparent｜Low viscosity｜Good demolding performance
- Application Areas:transparent｜Translucent accessories｜Electrical field｜Electronic field｜Electrical appliances｜Lighting installation｜currency
- Color:--
- Grade:Injection grade
Material Certification
Technical Data Sheet
Compare
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat Deflection Temperature | 1.8MPa,未退火 | ISO 75-2/A | 125 °C |
| vicat | ISO 306/B50 | 146 °C | |
| Heat Deflection Temperature | 0.45MPa,未退火 | ISO 75-2/B | 141 °C |
| 1.8MPa,未退火 | ISO 75-2/A | 128 °C | |
| vicat | ISO 306/B50 | 148 °C | |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 7E-05 cm/cm/°C |
| TD | ISO 11359-2 | 7E-05 cm/cm/°C | |
| RTI Elec | 1.5mm | UL 746 | 125 °C |
| RTI Imp | 1.5mm | UL 746 | 115 °C |
| RTI Str | 1.5mm | UL 746 | 125 °C |
| Heat Deflection Temperature | HDT | ASTM D648/ISO 75 | 139 ℃（℉） |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.7 mm/mm.℃ |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| refractive index | ASTM D542 | 1.585 | |
| ASTM D542 | 1.585 | ||
| transmissivity | 3000µm | ASTM D1003 | 88.0 % |
| transmittance | ASTM D1003/ISO 13468 | 88 % | |
| refractive index | ASTM D542/ISO 489 | 1.585 |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | 0.40mm | UL 94 | V-2 |
| 1.5mm | UL 94 | V-2 | |
| 3.0mm | UL 94 | V-2 | |
| Burning wire flammability index | 1.5mm | IEC 60695-2-12 | 850 °C |
| 3.0mm | IEC 60695-2-12 | 960 °C | |
| Hot filament ignition temperature | 1.5mm | IEC 60695-2-13 | 850 °C |
| 3.0mm | IEC 60695-2-13 | 875 °C | |
| Burning wire flammability index | 1.5mm | IEC 60695-2-12 | 825 °C |
| 3.2mm | IEC 60695-2-12 | 875 °C | |
| Hot filament ignition temperature | 1.5mm | IEC 60695-2-13 | 850 °C |
| 3.2mm | IEC 60695-2-13 | 875 °C | |
| UL flame retardant rating | 0.40mm | UL 94 | V-2 |
| 1.5mm | UL 94 | V-2 | |
| 3.0mm | UL 94 | V-2 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | NoBreak |
| ISO 179 | NoBreak |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt volume flow rate | 300°C/1.2kg | ISO 1133 | 15.0 cm3/10min |
| 300°C/1.2kg | ISO 1133 | 11.0 cm3/10min | |
| shrinkage rate | TD:4.00mm | 内部方法 | 0.50-0.70 % |
| MD:4.00mm | 内部方法 | 0.50-0.70 % | |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.20 % |
| density | ASTM D792/ISO 1183 | 1200 | |
| shrinkage rate | ASTM D955 | 0.5-0.7 % | |
| Water absorption rate | ASTM D570/ISO 62 | 0.2 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| dielectric constant | 100Hz | IEC 60250 | 3.10 |
| 1MHz | IEC 60250 | 3.00 | |
| Dissipation Factor | 100Hz | IEC 60250 | 1E-03 |
| 1MHz | IEC 60250 | 9E-03 | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 3 | |
| volume resistivity | IEC 60093 | >1.0E+15 ohms·cm | |
| dielectric strength | IEC 60243-1 | 30 KV/mm | |
| relative permittivity | 100Hz | IEC 60250 | 3.10 |
| 1MHz | IEC 60250 | 3.00 | |
| Dissipation Factor | 100Hz | IEC 60250 | 1E-03 |
| 1MHz | IEC 60250 | 9E-03 | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 2 | |
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms | |
| ASTM D257/IEC 60093 | >1×10^15 Ω | ||
| dielectric constant | ASTM D150/IEC 60250 | 3 | |
| ASTM D150/IEC 60250 | 3.1 | ||
| arc resistance | ASTM D495/IEC 60112 | 30 | |
| volume resistivity | ASTM D257/IEC 60093 | >1×10^13 Ω.cm |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| flexural modulus | ISO 178 | 2400 Mpa | |
| bending strength | ISO 178 | 94.0 Mpa | |
| Tensile modulus | ISO 527-2/1 | 2400 Mpa | |
| tensile strength | 屈服 | ISO 527-2/50 | 61.0 Mpa |
| Tensile strain | 屈服 | ISO 527-2/50 | 6.0 % |
| Nominal tensile fracture strain | ISO 527-2/50 | >50 % | |
| flexural modulus | ISO 178 | 2350 Mpa | |
| bending strength | ISO 178 | 92.0 Mpa | |
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 63 kg·cm/cm(J/M)ft·lb/in | |
| Elongation at break | ASTM D638/ISO 527 | >50 % | |
| Tensile modulus | ASTM D638/ISO 527 | 2400 kg/cm²(MPa)[Lb/in²] | |
| elongation | ASTM D638/ISO 527 | 6 % | |
| flexural modulus | ASTM D790/ISO 178 | 2350 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 93 kg/cm²(MPa)[Lb/in²] | |
| Elongation at break | ASTM D638/ISO 527 | >50 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top