PA66 Zytel® 101F NC010 DUPONT SINGAPORE

604

Unit Price:US$ 2,857 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
451.5MT
Delivery Terms:
FOB
Port of Loading :
Dongguan Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

+86 ********View

For more details, please contact the supplier!

Material Description

Material Properties:High sliding｜wear resistant
Application Areas:Electrical field｜Electronic field｜Engine parts
Color:--
Grade:--

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	6.0	kJ/m²
	Impact strength of cantilever beam gap	23°C	ISO 180/1A	5.5	kJ/m²
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	-40°C	ISO 180/1A	5.5	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	NoBreak
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	400	kJ/m²
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	300	kJ/m²
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	4.5	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	6.0	kJ/m²
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	300	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	V-2
FMVSS flammability		FMVSS302	SE
Extreme Oxygen Index		ISO 4589-2	28	%
Fogging-G-value	condensate	ISO 6452	1E-04	g
UL flame retardant rating	0.71mm	IEC 60695-11-10,-20	V-2
UL flame retardant rating	UL flame retardant rating	1.5mm	IEC 60695-11-10,-20	V-2
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	3100	Mpa
Tensile creep modulus	1hr	ISO 899-1	--	Mpa
tensile strength	Yield	ISO 527-2	82.0	Mpa
Tensile creep modulus	1000hr	ISO 899-1	--	Mpa
Bending modulus		ISO 178	2800	Mpa
Tensile strain	Yield	ISO 527-2	4.5	%
Nominal tensile fracture strain		ISO 527-2	20	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Effective thermal diffusivity coefficient			5E-08	m²/s
Linear coefficient of thermal expansion	TD	ISO 11359-2	1.1E-04	cm/cm/°C
Melting temperature		ISO 11357-3	262	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	1E-04	cm/cm/°C
Vicat softening temperature		ISO 306/B50	240	°C
Glass transition temperature		ISO 11357-2	60.0	°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	70.0	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	190	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	TD:80°C,48hr	ISO 294-4	0.10	%
	Shrinkage rate	MD	ISO 294-4	1.4	%
	Shrinkage rate	Shrinkage rate	TD	ISO 294-4	1.4	%
density		ISO 1183	1.14	g/cm³
SpecificHeatCapacity of Melt			2790	J/kg/°C
Top out temperature			190	°C
MediumDensity			0.970	g/cm³
ThermalConductivityofMelt			0.16	W/m/K
Shrinkage rate	MD:80°C,48hr	ISO 294-4	0.20	%
Water absorption rate	Saturation,23°C,2.00mm	ISO 62	8.5	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,2.00mm,50%RH	ISO 62	2.6	%
Stickiness		ISO 307	140	cm³/g
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	1MHz	IEC 60250	0.018
Dissipation factor	Dissipation factor	100Hz	IEC 60250	0.014
Relative permittivity	1MHz	IEC 60250	3.60
Relative permittivity	Relative permittivity	100Hz	IEC 60250	3.80
Dielectric strength		IEC 60243-1	32	KV/mm
Volume resistivity		IEC 60093	1E+15	ohms·cm
film	Test Condition	Test Method	Test Result	Test Unit
Tensile strain	Yield，MD	ISO 527-3	4.5	%
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
EmissionofOrganicCompounds		VDA277	6.50	µgC/g
Odor		VDA270	3.00

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top