Application Areas:Electrical field｜Electronic field｜Engine parts
Color:--
Grade:--
Technical Data Sheet
thermal performance
Test Condition
Test Method
Test Result
Linear coefficient of thermal expansion
TD
ISO 11359-2
1.1E-04 cm/cm/°C
Effective thermal diffusivity coefficient
5E-08 m²/s
Linear coefficient of thermal expansion
MD
ISO 11359-2
1E-04 cm/cm/°C
Vicat softening temperature
ISO 306/B50
240 °C
Glass transition temperature
ISO 11357-2
60.0 °C
Hot deformation temperature
1.8MPa,Unannealed
ISO 75-2/A
70.0 °C
Hot deformation temperature
0.45MPa,Unannealed
ISO 75-2/B
190 °C
Melting temperature
ISO 11357-3
262 °C
flammability
Test Condition
Test Method
Test Result
Fogging-G-value
condensate
ISO 6452
1E-04 g
Extreme Oxygen Index
ISO 4589-2
28 %
FMVSS flammability
FMVSS302
SE
UL flame retardant rating
1.5mm
UL 94
V-2
UL flame retardant rating
0.71mm
IEC 60695-11-10,-20
V-2
UL flame retardant rating
1.5mm
IEC 60695-11-10,-20
V-2
Supplementary Information
Test Condition
Test Method
Test Result
EmissionofOrganicCompounds
VDA277
6.50 µgC/g
Odor
VDA270
3.00
film
Test Condition
Test Method
Test Result
Tensile strain
Yield，MD
ISO 527-3
4.5 %
Physical properties
Test Condition
Test Method
Test Result
ThermalConductivityofMelt
0.16 W/m/K
MediumDensity
0.970 g/cm³
Top out temperature
190 °C
SpecificHeatCapacity of Melt
2790 J/kg/°C
density
ISO 1183
1.14 g/cm³
Shrinkage rate
TD
ISO 294-4
1.4 %
Shrinkage rate
TD:80°C,48hr
ISO 294-4
0.10 %
Shrinkage rate
MD
ISO 294-4
1.4 %
Shrinkage rate
MD:80°C,48hr
ISO 294-4
0.20 %
Water absorption rate
Saturation,23°C,2.00mm
ISO 62
8.5 %
Water absorption rate
Equilibrium,23°C,2.00mm,50%RH
ISO 62
2.6 %
Stickiness
ISO 307
140 cm³/g
Electrical performance
Test Condition
Test Method
Test Result
Volume resistivity
IEC 60093
1E+15 ohms·cm
Dielectric strength
IEC 60243-1
32 KV/mm
Relative permittivity
100Hz
IEC 60250
3.80
Relative permittivity
1MHz
IEC 60250
3.60
Dissipation factor
100Hz
IEC 60250
0.014
Dissipation factor
1MHz
IEC 60250
0.018
mechanical properties
Test Condition
Test Method
Test Result
Tensile modulus
ISO 527-2
3100 Mpa
Tensile creep modulus
1hr
ISO 899-1
-- Mpa
tensile strength
Yield
ISO 527-2
82.0 Mpa
Tensile creep modulus
1000hr
ISO 899-1
-- Mpa
Bending modulus
ISO 178
2800 Mpa
Tensile strain
Yield
ISO 527-2
4.5 %
Nominal tensile fracture strain
ISO 527-2
20 %
impact performance
Test Condition
Test Method
Test Result
Impact strength of simply supported beam without notch
-30°C
ISO 179/1eU
400 kJ/m²
Impact strength of simply supported beam without notch
23°C
ISO 179/1eU
NoBreak
Impact strength of cantilever beam gap
-40°C
ISO 180/1A
5.5 kJ/m²
Impact strength of cantilever beam gap
23°C
ISO 180/1A
5.5 kJ/m²
Impact strength of cantilever beam gap
-30°C
ISO 180/1A
6.0 kJ/m²
Charpy Notched Impact Strength
-30°C
ISO 179/1eA
4.5 kJ/m²
Charpy Notched Impact Strength
23°C
ISO 179/1eA
6.0 kJ/m²
Suspended wall beam without notch impact strength
23°C
ISO 180/1U
300 kJ/m²
Suspended wall beam without notch impact strength
-30°C
ISO 180/1U
300 kJ/m²
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
