PA66 Amilan® CM3006 TORAY JAPAN
331
- Unit Price:US$ 4,231 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:196.9MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Thermal stability｜Flame retardant
- Application Areas:Automotive sector｜Electrical components
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R计秤,23°C | 119 | |
| R计秤,80°C | 97 -- |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat Deflection Temperature | 4.6kg/cm2 | ASTM D-648 | 无水｜220 °C |
| 4.6kg/cm2 | ASTM D-648 | 3.5%水｜- °C | |
| melting temperature | 差示扫描测热计DSC | 265 °C | |
| specific heat | 无水｜0.4 Cal/g·℃ | ||
| 3.5%水｜- Cal/g·℃ | |||
| Linear coefficient of thermal expansion | ASTM D-696 | 无水｜9-10 ×10-5cm/cm/℃ | |
| ASTM D-696 | 3.5%水｜- ×10-5cm/cm/℃ | ||
| UL-94 flame retardant grade | 1/32" | UL 94 | 无水｜V-2 |
| 1/32" | UL 94 | 3.5%水｜- | |
| thermal conductivity | 无水｜0.21 Kcal/m·hr·℃ | ||
| 3.5%水｜- Kcal/m·hr·℃ | |||
| Heat Deflection Temperature | 0.45MPa,未退火 | °C | 220 -- |
| melting temperature | °C | 265 -- | |
| Linear coefficient of thermal expansion | MD | cm/cm/°C | 9.0E-5到1.0E-4 -- |
| specific heat | J/kg/°C | 2100 -- | |
| thermal conductivity | W/m/K | 0.32 -- | |
| Combustibility (rate) | UL 94 | V-2 | |
| Heat Deflection Temperature | HDT | ASTM D648/ISO 75 | 220(0.46MPa) ℃（℉） |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.32 mm/mm.℃ |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | 0.79mm | V-2 -- |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | 23℃，24小时 | ASTM D-570 | 无水｜1.2 % |
| 23℃，24小时 | ASTM D-570 | 3.5%水｜- % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -40°C | 无断裂 -- | |
| 23°C | 无断裂 -- |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Taber abraser | 1000g,CS-17 | ASTM D-1044 | 3.5%水｜- mg/1000次 |
| 1000g,CS-17 | ASTM D-1044 | 无水｜8 mg/1000次 | |
| shrinkage rate | MD：1.00mm3 | % | 0.80-1.5 -- |
| MD：3.00mm4 | % | 1.5-2.2 -- | |
| Water absorption rate | 23°C,24hr | % | 1.2 -- |
| 饱和,23°C | % | 8.0 -- | |
| density | ASTM D792/ISO 1183 | 1.14 | |
| Water absorption rate | ASTM D570/ISO 62 | 1.2 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| volume resistivity | ASTM D-257 | 3.5%水｜1012-1013 Ω.cm | |
| Dissipation Factor | 50Hz | ASTM D-150 | 无水｜0.06 |
| 50Hz | ASTM D-150 | 3.5%水｜- | |
| Compared to the Leakage Traceability Index (CTI) | UL 746 | 无水｜- V | |
| UL 746 | 3.5%水｜530 V | ||
| dielectric constant | 50Hz | ASTM D-150 | 无水｜1.6 |
| 50Hz | ASTM D-150 | 3.5%水｜- | |
| volume resistivity | ASTM D-257 | 无水｜1014-1015 Ω.cm | |
| ohms·cm | 1.0E+13-1.0E+14 1.0E+12到1.0E+13 | ||
| dielectric constant | 23°C,50Hz | 1.60 -- | |
| Dissipation Factor | 23°C,50Hz | 0.060 -- | |
| Compared to the Leakage Tracking Index (CTI) | CTI | V | -- |
| dielectric constant | ASTM D150/IEC 60250 | 3.3 |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| shearing strength | 23℃ | ASTM D-732 | 3.5%水｜770 kg/cm2 |
| bending strength | 80℃ | ASTM D-790 | 无水｜640 kg/cm2 |
| 80℃ | ASTM D-790 | 3.5%水｜400 kg/cm2 | |
| flexural modulus | 80℃ | ASTM D-790 | 无水｜9000 kg/cm2 |
| 80℃ | ASTM D-790 | 3.5%水｜5000 kg/cm2 | |
| Rockwell hardness | 23℃ | ASTM D-785 | 无水｜119 R-标度 |
| 23℃ | ASTM D-785 | 3.5%水｜100 R-标度 | |
| flexural modulus | 23℃ | ASTM D-790 | 无水｜29000 kg/cm2 |
| Elongation at break | 23℃ | ASTM D-638 | 无水｜90 % |
| 23℃ | ASTM D-638 | 3.5%水｜< 200 % | |
| Impact strength of cantilever beam gap | -40℃，V缺口1/2 | ASTM D-256 | 无水｜3.5 kg·cm/cm |
| -40℃，V缺口1/2 | ASTM D-256 | 3.5%水｜- kg·cm/cm | |
| flexural modulus | -40℃ | ASTM D-790 | 无水｜44000 kg/cm2 |
| -40℃ | ASTM D-790 | 3.5%水｜42000 kg/cm2 | |
| Rockwell hardness | 23℃ | ASTM D-785 | 无水｜97 M-标度 |
| 23℃ | ASTM D-785 | 3.5%水｜- M-标度 | |
| shearing strength | 23℃ | ASTM D-732 | 无水｜790 kg/cm2 |
| bending strength | -40℃ | ASTM D-790 | 3.5%水｜1300 kg/cm2 |
| Impact strength of cantilever beam gap | 23℃，无缺口1/8 | 无水｜无断裂 kg·cm/cm2 | |
| tensile strength | 23℃，屈服 | ASTM D-638 | 3.5%水｜530 kg/cm2 |
| compressive strength | 23℃ | ASTM D-695 | 无水｜910 kg/cm2 |
| 23℃ | ASTM D-695 | 3.5%水｜- kg/cm2 | |
| bending strength | 23℃ | ASTM D-790 | 无水｜1150 kg/cm2 |
| 23℃ | ASTM D-790 | 3.5%水｜650 kg/cm2 | |
| tensile strength | 80℃，屈服 | ASTM D-638 | 无水｜430 kg/cm2 |
| 80℃，屈服 | ASTM D-638 | 3.5%水｜400 kg/cm2 | |
| flexural modulus | 23℃ | ASTM D-790 | 3.5%水｜14000 kg/cm2 |
| tensile strength | 23℃，屈服 | ASTM D-638 | 无水｜800 kg/cm2 |
| Impact strength of cantilever beam gap | 23℃，无缺口1/8 | 3.5%水｜- kg·cm/cm2 | |
| 23℃，V缺口1/2 | ASTM D-256 | 无水｜5 kg·cm/cm | |
| 23℃，V缺口1/2 | ASTM D-256 | 3.5%水｜28 kg·cm/cm | |
| tensile strength | -40℃，屈服 | ASTM D-638 | 无水｜1150 kg/cm2 |
| -40℃，屈服 | ASTM D-638 | 3.5%水｜1100 kg/cm2 | |
| bending strength | -40℃ | ASTM D-790 | 无水｜1450 kg/cm2 |
| -40°C | 140 MPa | ||
| 23°C | MPa | 115 65.0 | |
| 80°C | MPa | 65.0 40.0 | |
| compression stress | 23°C | MPa | 90.0 -- |
| shear strength | 23°C | MPa | 80.0 75.0 |
| Taber abraser | 1000Cycles | mg | 8.00 -- |
| Friction coefficient - vs. Metal | 0.15to0.20 -- | ||
| tensile strength | -40°C | 115 MPa | |
| 23°C | MPa | 80.0 50.0 | |
| 80°C | MPa | 40.0 40.0 | |
| Tensile strain | 屈服,23°C | % | 1.5 -- |
| 断裂,23°C | % | 25 | |
| flexural modulus | -40°C | MPa | 4300 4100 |
| 23°C | MPa | 2900 1400 | |
| 80°C | MPa | 900 500 | |
| Charpy Notched Impact Strength | ASTM D256/ISO 179 | 50 kg·cm/cm(J/M)ft·lb/in | |
| bending strength | ASTM D790/ISO 178 | 2.8 kg·cm/cm(J/M)ft·lb/in |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top