Material Properties:Dimensional stability｜High impact｜High rigidity｜Filler: Glass fiber reinforced material｜40% filler by weight
Application Areas:Printer components｜Cold water pipe application｜Water heater
Color:--
Grade:Injection grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
vicat		ASTM D15254	163 °C
Linear coefficient of thermal expansion	MD：-40到40°C	ASTME831	1.1E-05 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：-40到40°C	ASTME831	6.3E-05 cm/cm/°C
Heat Deflection Temperature	0.45MPa,未退火,3.20mm	ASTM D648	159 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,未退火,3.20mm	ASTM D648	146 °C

Impact resistance	Test Condition	Test Method	Test Result
Dart impact	-30°C,TotalEnergy	ASTM D3763	14.1 J
Dart impact	Dart impact	23°C,TotalEnergy	ASTM D3763	16.8 J

Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	260°C/5.0kg	ASTM D1238	1.3 g/10min
shrinkage rate	MD：3.20mm	内部方法	0.17-0.18 %
shrinkage rate	shrinkage rate	TD：3.20mm	内部方法	0.27-0.61 %

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	屈服	ASTM D638	95.8 Mpa
tensile strength	tensile strength	断裂	ASTM D638	95.8 Mpa
elongation	断裂	ASTM D638	6.4 %
flexural modulus	50.0mm跨距	ASTM D790	8320 Mpa
bending strength	Break,50.0mmSpan	ASTM D790	151 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top