Material Properties:Creep resistance｜antioxidant｜Fatigue resistance
Application Areas:Cable｜Fitness equipment｜Subway/high-speed rail spacer｜Electric wire｜TPEE single line｜packing｜Drive belt｜Oil pressure pipe
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Method	Test Result
melt mass-flow rate	ISO 1133	30 g/10 min
Shrinkage rate	ISO 294-4	0.65 %
Water absorption rate	ISO 62	0.40 %

Basic performance	Test Condition	Test Method	Test Result
Shore hardness		ISO 868	55

Mechanical properties	Test Method	Test Result
Shore hardness	ISO 868	55
tensile strength	ISO 527-2	40.0 Mpa
Tensile strain	ISO 527-2	500 %
Flexural modulus	ISO 178	190 Mpa
Charpy Notched Impact Strength	ISO 179/1eA	无断裂

Other performance	Test Condition	Test Method	Test Result
tensile strength		ISO 527	32 Mpa

Electrical performance	Test Method	Test Result
Surface Resistivity	IEC 60093	3.6E+13 Ohm
Volume resistivity	IEC 60093	2.1E+13 ohm·cm
dielectric strength	IEC 60243-1	17 KV/mm

Thermal performance	Test Method	Test Result
Heat distortion temperature	ISO 75-2/A	45.0 °C
melting temperature	ISO 3146	204 °C
Heat distortion temperature	ISO 75-2/B	65.0 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top