PC LEXAN™ EXL9330-WH6E276 SABIC INNOVATIVE NANSHA
229
- Unit Price:US$ 8,161 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:42MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Flame retardant｜Toughening｜UV resistance
- Application Areas:food｜Thin walled products｜Casters
- Color:--
- Grade:--
Technical Data Sheet
Compare
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ball-indentation hardness | H 358/30 | ISO 2039-1 | 90.0 Mpa |
| thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat Deflection Temperature | 0.45 MPa, 未退火, 4.00 mm, 100 mm 跨距11 | ISO 75-2/Be | 135 °C |
| 1.8 MPa, 未退火, 6.40 mm | ASTM D648 | 124 °C | |
| 1.8 MPa, 未退火, 4.00 mm, 100 mm 跨距11 | ISO 75-2/Ae | 124 °C | |
| 1.8 MPa, 未退火, 3.20 mm | ASTM D648 | 120 °C | |
| Linear coefficient of thermal expansion | 流动 : -40 到 40°C | ASTM E831 | 6.7E-5 cm/cm/°C |
| vicat | -- | ASTM D152512 | 142 °C |
| -- | ISO 306/B50 | 140 °C | |
| ball-indentation hardness | 123 到 127°C | IEC 60695-10-2 | 通过 |
| RTI | UL 746 | 120 °C | |
| RTI Imp | UL 746 | 115 °C | |
| Linear coefficient of thermal expansion | 横向 : 23 到 80°C | ISO 11359-2 | 7.7E-5 cm/cm/°C |
| RTI Elec | UL 746 | 125 °C | |
| Linear coefficient of thermal expansion | 横向 : -40 到 40°C | ASTM E831 | 6.7E-5 cm/cm/°C |
| 流动 : 23 到 80°C | ISO 11359-2 | 7.2E-5 cm/cm/°C | |
| Heat Deflection Temperature | 0.45 MPa, 未退火, 3.20 mm | ASTM D648 | 134 °C |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Limiting Oxygen Index | ISO 4589-2 | 35 % | |
| Burning wire flammability index | 1.0 mm | IEC 60695-2-12 | 960 °C |
| Hot filament ignition temperature | 1.0 mm | IEC 60695-2-13 | 825 °C |
| UL flame retardant rating | 3.0 mm | UL 94 | 5VA |
| 1.5 mm | UL 94 | V-0 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 60 kJ/m² |
| 23°C | ISO 179/1eA | 75 kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 无断裂 |
| 23°C | ISO 179/1eU | 无断裂 | |
| Impact strength of cantilever beam gap | -50°C | ASTM D256 | 590 J/m |
| -30°C | ASTM D256 | 680 J/m | |
| 23°C | ASTM D256 | 800 J/m | |
| 23°C8 | 内部方法 | 1100 J/m | |
| 23°C, 6.40 mm | ASTM D256 | 640 J/m | |
| -30°C9 | ISO 180/1A | 55 kJ/m² | |
| -30°C10 | ISO 180/4A | 65 kJ/m² | |
| 23°C9 | ISO 180/1A | 70 kJ/m² | |
| 23°C10 | ISO 180/4A | 80 kJ/m² | |
| Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | 无断裂 |
| 23°C | ISO 180/1U | 无断裂 | |
| Dart impact | 23°C, Total Energy | ASTM D3763 | 52.0 J |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| volume resistivity | IEC 60093 | > 1.0E+15 ohms·cm | |
| Surface Resistivity | IEC 60093 | > 1.0E+15 ohms | |
| Hot wire ignition (HWI) | UL 746 | PLC 1 | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | V | |
| High arc combustion index (HAI) | UL 746 | PLC 0 | |
| Compared to the Leakage Tracking Index (CTI) | UL 746 | PLC 3 | |
| Dissipation Factor | 60 Hz | IEC 60250 | 1.0E-3 |
| 50 Hz | IEC 60250 | 1.0E-3 | |
| 1 MHz | ASTM D150 | 8.5E-3 | |
| 60 Hz | ASTM D150 | 2.4E-3 | |
| 50 Hz | ASTM D150 | 2.4E-3 | |
| dielectric constant | 60 Hz | IEC 60250 | 2.60 |
| 1 MHz | IEC 60250 | 2.70 | |
| 50 Hz | IEC 60250 | 2.60 | |
| 1 MHz | ASTM D150 | 2.90 | |
| 50 kHz | ASTM D150 | 2.95 | |
| dielectric strength | 3.20 mm, in Oil | ASTM D149 | 17 KV/mm |
| 3.20 mm, 在油中 | IEC 60243-1 | 16 KV/mm | |
| dielectric constant | 60 Hz | ASTM D150 | 2.95 |
| injection | Test Condition | Test Method | Test Result |
|---|---|---|---|
| screw speed | 40 to 70 rpm | ||
| Exhaust hole depth | 0.025 to 0.076 mm | ||
| Back pressure | 0.300 to 0.700 Mpa | ||
| Processing (melt) temperature | 295 to 315 °C | ||
| mold temperature | 70 to 95 °C | ||
| Spray nozzle temperature | 290 to 310 °C | ||
| Temperature at the front of the material cylinder | 295 to 315 °C | ||
| Temperature at the rear of the barrel | 215 to 295 °C | ||
| Temperature in the middle of the barrel | 280 to 305 °C | ||
| Suggested injection volume | 40 to 60 % | ||
| Suggested maximum moisture content | 0.020 % | ||
| drying time | 3.0 to 4.0 hr | ||
| drying temperature | 120 °C |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | -- | ASTM D792 | 1.18 g/cm³ |
| -- | ISO 1183 | 1.19 g/cm³ | |
| melt mass-flow rate | 300°C/1.2 kg | ASTM D1238 | 10 g/10 min |
| Melt volume flow rate | 300°C/1.2 kg | ISO 1133 | 9.00 cm3/10min |
| shrinkage rate | 流动 : 3.20 mm | 内部方法 | 0.40 - 0.80 % |
| 横向流动 : 3.20 mm | 内部方法 | 0.40 - 0.80 % | |
| Water absorption rate | 饱和, 23°C | ISO 62 | 0.35 % |
| 平衡, 23°C, 50% RH | ISO 62 | 0.15 % | |
| Outdoor applicability | UL 746C | f1 |
| mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | --2 | ASTM D638 | 2100 Mpa |
| -- | ISO 527-2/1 | 2100 Mpa | |
| tensile strength | 屈服3 | ASTM D638 | 58.0 Mpa |
| 屈服 | ISO 527-2/50 | 55.0 Mpa | |
| 断裂3 | ASTM D638 | 61.0 Mpa | |
| 断裂 | ISO 527-2/50 | 60.0 Mpa | |
| elongation | 屈服3 | ASTM D638 | 6.0 % |
| 屈服 | ISO 527-2/50 | 6.0 % | |
| 断裂3 | ASTM D638 | 130 % | |
| 断裂 | ISO 527-2/50 | 130 % | |
| flexural modulus | 50.0 mm 跨距4 | ASTM D790 | 2060 Mpa |
| --5 | ISO 178 | 2200 Mpa | |
| bending strength | --5,6 | ISO 178 | 85.0 Mpa |
| 屈服, 50.0 mm 跨距4 | ASTM D790 | 88.0 Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top