PC LEXAN™ 923A-116 SABIC INNOVATIVE NANSHA

304

Unit Price:US$ 2,668 /MT
Packaging Specification:
25 KG/PKG
Packaging Material:
Paper bag
Supply Quantity:
94MT
Delivery Terms:
FOB
Port of Loading :
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 ********View

serv********View

For more details, please contact the supplier!

Material Description

Material Properties:High rigidity｜Weather resistance
Application Areas:Communication equipment
Color:--
Grade:Injection grade

Material Certification

Technical Data Sheet Compare

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	M计秤	ASTM D785	70
Rockwell hardness	Rockwell hardness	R计秤	ASTM D785	118

thermal performance	Test Condition	Test Method	Test Result
vicat		ASTM D15255	152 °C
Linear coefficient of thermal expansion	MD：-40到95°C	ASTME831	6.8E-05 cm/cm/°C
thermal conductivity		ASTMC177	0.19 W/m/K
RTI Elec		UL 746	130 °C
RTI Imp		UL 746	120 °C
RTI Str		UL 746	130 °C
Heat Deflection Temperature	0.45MPa,未退火,6.40mm	ASTM D648	138 °C
Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,未退火,6.40mm	ASTM D648	132 °C
thermal conductivity		ASTMC177	0.19 W/m/K

optical performance	Test Condition	Test Method	Test Result
refractive index		ASTM D542	1.586
transmissivity	2540µm	ASTM D1003	85.0 %
Haze ratio	2540µm	ASTM D1003	1.0 %
refractive index		ASTM D542	1.586

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	1.5mm	UL 94	V-2
UL flame retardant rating	UL flame retardant rating	3.0mm	UL 94	V-0

Impact resistance	Test Condition	Test Method	Test Result
Dart impact	23°C	ASTM D3029	169 J
Impact strength of cantilever beam gap		ASTM D1822	525 kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D1822	525 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
dielectric constant	1MHz	ASTM D150	2.96
Dissipation Factor	50Hz	ASTM D150	9E-04
	Dissipation Factor	60Hz	ASTM D150	9E-04
	Dissipation Factor	Dissipation Factor	1MHz	ASTM D150	0.010
arc resistance		ASTM D495	PLC7
Compared to the Leakage Tracking Index (CTI)	CTI	UL 746	PLC 3
High arc combustion index (HAI)	HAI	UL 746	PLC 2
High Voltage Arc Traceability Rate (HVTR)	HVTR	UL 746	PLC 3
Hot wire ignition (HWI)	HWI	UL 746	PLC 2
volume resistivity		ASTM D257	>1.0E+17 ohms·cm
dielectric strength	3.20mm,inAir	ASTM D149	17 KV/mm
dielectric constant	50Hz	ASTM D150	3.01
dielectric constant	dielectric constant	60Hz	ASTM D150	3.01
arc resistance		ASTM D495	PLC7
volume resistivity		ASTM D257	>1.0E+17 ohms·cm

Physical properties	Test Condition	Test Method	Test Result
Specific volume		ASTM D792	0.835 cm³/g
melt mass-flow rate	300°C/1.2kg	ASTM D1238	15 g/10min
shrinkage rate	MD：3.20mm	内部方法	0.50-0.70 %
Water absorption rate	24hr	ASTM D570	0.15 %
	Water absorption rate	平衡,23°C	ASTM D570	0.35 %
	Water absorption rate	Water absorption rate	平衡,100°C	ASTM D570	0.58 %
Outdoor applicability		UL 746C	f1
density		ASTM D792	1.21 g/cm³
density	density		ASTM D792	1.22 g/cm³
Outdoor applicability		UL 746C	f1

mechanical properties	Test Condition	Test Method	Test Result
tensile strength	屈服	ASTM D638	62.1 Mpa
tensile strength	tensile strength	断裂	ASTM D638	55.8 Mpa
elongation	屈服	ASTM D638	7.0 %
elongation	elongation	断裂	ASTM D638	90 %
flexural modulus	50.0mm跨距	ASTM D790	2240 Mpa
bending strength	屈服,50.0mm跨距	ASTM D790	91.0 Mpa
Taber abraser	1000Cycles,1000g,CS-17转轮	ASTM D1044	10.0 mg

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top