Physical properties	Test Condition	Test Method	Test Result
melt mass-flow rate	250°C/1.0kg	ISO 1133	8.7 g/10min
Melt volume flow rate	250°C/2.16kg	ISO 1133	16.0 cm3/10min
Viscosity value	0.5%OCP	内部方法	1.23 cm³/g
density		ASTM D792/ISO 1183	1.315
melt mass-flow rate		ASTM D1238/ISO 1133	224 g/10min

mechanical properties	Test Condition	Test Method	Test Result
tensile strength		ISO 527-1/-2	58 MPa
bending strength		ISO 178	83 MPa
flexural modulus		ISO 178	2.4 Gpa
Charpy Notched Impact Strength		ISO 179/1eA	5.1 KJ/m
flexural modulus		ISO 178	2400 Mpa
bending strength		ASTM D790	82.0 Mpa
bending strength	bending strength		ISO 178	83.0 Mpa
tensile strength	屈服	ASTM D638	54.0 Mpa
tensile strength	tensile strength		ISO 527-2	58.0 Mpa
elongation	断裂	ASTM D638	>150 %
Tensile strain	断裂	ISO 527-2	120 %
flexural modulus		ASTM D790	2500 Mpa
Charpy Notched Impact Strength		ASTM D256/ISO 179	5.1 kg·cm/cm(J/M)ft·lb/in
Elongation at break		ASTM D638/ISO 527	120 %
tensile strength		ASTM D638/ISO 527	58 kg/cm²(MPa)[Lb/in²]
flexural modulus		ASTM D790/ISO 178	2.4 kg/cm²(MPa)[Lb/in²]
bending strength		ASTM D790/ISO 178	83 kg/cm²(MPa)[Lb/in²]

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top