Material Properties:High transparency
Application Areas:Medical packaging｜This material can be used for processing stationery｜Thermoformed products｜Squeezing medical catheters and blow molding them into transparent saline bags (bottles)｜Bottle blowing (alternative to LDPE bottle blowing)
Color:--
Grade:Injection grade

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	HDT	ASTM D-648	80 °C

Basic performance	Test Method	Test Result
melt mass-flow rate	ASTM D-1238	2.0 g/10min
density	ASTM D-1505	0.90 g/cm³
Yellowness Index	ASTM D-1925-63T	2

mechanical properties	Test Condition	Test Method	Test Result
elongation	断裂	ASTM D-638	600 %
flexural modulus		ASTM D-790A	1100 Mpa
Impact strength of cantilever beam gap	23℃	ASTM D-256	8.0 kJ/m²
Rockwell hardness		ASTM D-785	80 R
tensile strength	屈服	ASTM D-638	25.0 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top