Material Properties:Antichemical｜Not resistant to hot water immersion｜Dimensional stability
Application Areas:Electronic and electrical components｜Electrical applications｜Industrial components
Color:--
Grade:Injection grade

Material Certification

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.780 mm	IEC 60695-11-10, -20	HB
UL flame retardant rating	UL flame retardant rating	1.60 mm	IEC 60695-11-10, -20	HB
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.52	g/cm³
Water absorption rate	Saturation, 23°C	ISO 62	0.50	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.25	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	8500	MPa
Tensile modulus	Tensile modulus		ISO 527-2	5500	MPa
tensile strength	Break	ISO 527-2	150	MPa
Tensile strain	Break	ISO 527-2	2.5	%
Impact strength of simply supported beam without notch	23°C	ISO 179/1eA	9.0	kJ/m²
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8 MPa,Unannealed	ISO 75-2/A	225	°C
Melting temperature		ISO 11357-3	255	°C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	0.000030	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Transverse	ISO 11359-2	0.000070	cm/cm/°C
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093		ohms
Volume resistivity		IEC 60093		ohm·cm
Volume resistivity	Volume resistivity		IEC 60093		ohm·m

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top