Material Properties:Glass fiber reinforced｜Good stability｜Good flexibility｜High mobility｜High hardness
Application Areas:printed circuit board｜Automotive sector｜Protective covering｜Shell
Color:--
Grade:Flame retardant grade

Material Certification

Technical Data Sheet Compare

thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature	1.8MPa,未退火	ISO 75-2/A	207 °C
melting temperature		ISO 3146	223 °C

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength	23°C	ISO 179	9.0 kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179	62 kJ/m²
Impact strength of cantilever beam gap	23°C	ISO 180	11 kJ/m²

Physical properties	Test Condition	Test Method	Test Result
density		ISO 1183	1.53 g/cm³
Water absorption rate	23°C,24hr	ISO 62	0.20 %
	Water absorption rate	饱和,23°C	ISO 62	0.40 %
	Water absorption rate	Water absorption rate	平衡,23°C,50%RH	ISO 62	0.20 %
Viscosity value	降低的粘度	ISO 1628	104.0 ml/g

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		IEC 60093	1E+13 ohms
volume resistivity		IEC 60093	>1.0E+15 ohms·cm

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus	23°C	ISO 527-2	9800 Mpa
tensile strength	断裂,23°C	ISO 527-2	136 Mpa
Tensile strain	断裂,23°C	ISO 527-2	2.6 %
flexural modulus	23°C	ISO 178	8800 Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top