PC LEXAN™ EXL1433T SABIC INNOVATIVE US
161
- Unit Price:US$ 4,694 /MT
- Packaging Specification:25 KG/PKG
- Packaging Material:Paper bag
- Supply Quantity:51MT
- Delivery Terms:FOB
- Port of Loading :China Main Port
- Accepted Payment Methods:T/T
- Shipping:Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 ********View
serv********View
For more details, please contact the supplier!
Material Description
- Material Properties:Middle flow｜High ductility at low temperature｜Short molding cycle
- Application Areas:Automotive sector｜Electronic and Electrical Applications｜Plastic bag
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 10 g/10min | |
| Melt volume flow rate | ISO 1133 | 9.50 cm3/10min | |
| Shrinkage rate | 内部方法 | 0.40-0.80 % | |
| 内部方法 | 0.40-0.80 % | ||
| Water absorption rate | ISO 62 | 0.12 % | |
| ISO 62 | 0.093 % | ||
| Shrinkage rate | 内部方法 | 0.40-0.80 % | |
| 内部方法 | 0.40-0.80 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 90 | |
| ISO 2039-2 | 90 |
| optical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| transmissivity | ASTM D1003 | 82.0 % | |
| Haze ratio | ASTM D1003 | 3.0 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot filament ignition temperature | IEC 60695-2-13 | 825 °C | |
| IEC 60695-2-13 | 825 °C | ||
| UL flame retardant rating | UL 94 | V-2 | |
| UL 94 | V-2 | ||
| Burning wire flammability index | IEC 60695-2-12 | 960 °C | |
| UL flame retardant rating | UL 94 | V-2 | |
| Burning wire flammability index | IEC 60695-2-12 | 960 °C | |
| Hot filament ignition temperature | IEC 60695-2-13 | 825 °C | |
| IEC 60695-2-13 | 825 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ISO 178 | 2150 Mpa | |
| bending strength | ISO 178 | 90.2 Mpa | |
| ASTM D790 | 94.3 Mpa | ||
| Tensile modulus | ISO 527-2/1 | 2350 Mpa | |
| tensile strength | ASTM D638 | 58.0 Mpa | |
| ISO 527-2/50 | 57.9 Mpa | ||
| ASTM D638 | 64.1 Mpa | ||
| ISO 527-2/50 | 61.5 Mpa | ||
| elongation | ASTM D638 | 5.8 % | |
| Tensile strain | ISO 527-2/50 | 5.5 % | |
| elongation | ASTM D638 | 130 % | |
| Tensile strain | ISO 527-2/50 | 120 % | |
| Flexural modulus | ASTM D790 | 2220 Mpa | |
| Tensile modulus | ASTM D638 | 2220 Mpa | |
| 50.0mm span | ASTM D790 | 2220 Mpa | |
| --7 | ISO 178 | 2150 Mpa | |
| --8 | ISO 178 | 90.2 Mpa | |
| Yield, 50.0mm span | ASTM D790 | 94.3 Mpa | |
| --1 | ASTM D638 | 2220 Mpa | |
| yield | ASTM D638 | 58.0 Mpa | |
| ISO 527-2/50 | 57.9 Mpa | ||
| fracture | ASTM D638 | 64.1 Mpa | |
| ISO 527-2/50 | 61.5 Mpa | ||
| yield | ASTM D638 | 5.8 % | |
| ISO 527-2/50 | 5.5 % | ||
| fracture | ASTM D638 | 130 % | |
| ISO 527-2/50 | 120 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Dart impact | ASTM D3763 | 85.0 J | |
| ASTM D3763 | 82.4 J | ||
| Charpy Notched Impact Strength | ISO 179/1eA | 50 kJ/m² | |
| ISO 179/1eA | 70 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179/1eU | NoBreak | |
| ISO 179/1eU | NoBreak | ||
| Impact strength of cantilever beam gap | ISO 180/1A | 45 kJ/m² | |
| ISO 180/1A | 65 kJ/m² | ||
| Suspended wall beam without notch impact strength | ISO 180/1U | NoBreak | |
| ISO 180/1U | NoBreak | ||
| -30°C | ISO 180/1A | 45 kJ/m² | |
| 23°C | ISO 180/1A | 65 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180/1U | 无断裂 | |
| ISO 180/1U | 无断裂 | ||
| Charpy Notched Impact Strength | ISO 179/1eA | 50 kJ/m² | |
| ISO 179/1eA | 70 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| ISO 179/1eU | 无断裂 | ||
| -30°C | ASTM D256 | 800 J/m | |
| 23°C | ASTM D256 | 890 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | >1.0E+15 ohms | |
| Volume resistivity | ASTM D257 | >1.0E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 124 °C | |
| ISO 75-2/Af | 119 °C | ||
| vicat | ASTM D152510 | 141 °C | |
| ISO 306/B50 | 141 °C | ||
| ISO 306/B120 | 142 °C | ||
| ball-indentation hardness | IEC 60695-10-2 | Pass | |
| Linear coefficient of thermal expansion | ASTME831 | 7.2E-05 cm/cm/°C | |
| ISO 11359-2 | 7.2E-05 cm/cm/°C | ||
| ASTME831 | 7.9E-05 cm/cm/°C | ||
| ISO 11359-2 | 7.9E-05 cm/cm/°C | ||
| RTI Elec | UL 746 | 130 °C | |
| RTI Str | UL 746 | 130 °C | |
| 1.8MPa, Unanealed, 3.20mm | ASTM D648 | 124 °C | |
| 1.8MPa, Unanealed, 64.0mm span | ISO 75-2/Af | 119 °C | |
| Flow: -40 to 95 ° C | ASTME831 | 7.2E-05 cm/cm/°C | |
| Flow: 23 to 80 ° C | ISO 11359-2 | 7.2E-05 cm/cm/°C | |
| Horizontal: -40 to 95 ° C | ASTME831 | 7.9E-05 cm/cm/°C | |
| Horizontal: 23 to 80 ° C | ISO 11359-2 | 7.9E-05 cm/cm/°C | |
| RTI | UL 746 | 130 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top